Difference between revisions of "Coastal zone characteristics"

From Coastal Wiki
Jump to: navigation, search
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Revision}}
+
#REDIRECT[[Characteristics of sedimentary shores]]
 
 
Defining the '''characteristics of the coastal zone''' will depend on the coastal type.  Sand is a common marine sediment producing sandy beaches resulting from littoral transport.  It is these hydrographic conditions that determine the appearance of the coastline.  In environments that are fairly calm in terms of wave conditions muddy coast tend to be more dominant, in comparison rocky coasts are continually cut back by the sea.  Arctic coastlines are those which are exposed to more than 6 months a year freezing. A barrier coast is formed when a lagoon separates a barrier island (which runs parallel to the shore) from the coastline. 
 
 
 
 
 
==Different coastal types:==
 
 
 
===Sandy beaches===
 
[[Image:sandy coast.jpg|thumb|Fig. 1. Sandy coast. Source: [http://www.dhigroup.com DHI]]]
 
Sand is a very common marine sediment and is transported along the [[shoreline]] by [[littoral transport]]. Sand transport ([[littoral transport]] or littoral drift) is driven by the breaking [[waves]] and the longshore currents in the wave breaking zone. The appearance of a natural [[Sandy beaches|sandy beach]] (Fig. 1) is determined by hydrographic conditions and geology. Any interference will cause a reaction in the form of a [[shoreline]] response. Therefore, understanding of physical processes is important and the development of suitable solutions required, supported by numerical modelling if needed.
 
 
 
<u>'''Links'''</u>:
 
*[[Sandy beaches]]
 
*[[Coastal Hydrodynamics And Transport Processes#Littoral Transport|Littoral Transport]]
 
 
 
*[[Classification of Coastal Profiles]]
 
*[[Shore nourishment]]
 
 
 
===Muddy coasts===
 
[[Image:mangrove coast.jpg|thumb|Fig. 2. Mangrove coast. Source: [http://www.dhigroup.com DHI]]]
 
Muddy coasts are only found in environments that are fairly calm with respect to wave conditions; or there is abundant supply of fine sediments. They are normally vegetated e.g. [[mangrove|mangroves]] (Fig. 2) fronted by very flat slopes/[[tidal flat|tidal flats]] or a muddy coast with [[mangrove]] vegetation which is characterized by a muddy shoreface, sometimes in the form of muddy [[tidal flat|tidal flats]], and the lack of a sandy shore.
 
 
 
<u>'''Links'''</u>:
 
*[[Characteristics of muddy coasts]]
 
*[[Mud]]
 
 
 
===Rocky coasts===
 
Rocky coasts are continuously cut back by the sea and are characterised by [[erosion]]al features. They have a slow rate of morphological change, and experience the main [[erosion|erosional]] processes of: mechanical wave erosion, abrasion and hydraulic action; weathering - physical, salt, chemical and water-layer levelling; bio-erosion - biochecmial and biophysical; and mass movements by rock falls and toppling, slides and flows<ref>Masselink, G and Hughes, M. 2003. Introduction to Coastal Processes and Geomorphology. Hodder Arnold.</ref>.
 
 
 
===Arctic coasts===
 
[[Image:Arctic coast.jpg|thumb|Fig. 3. Arctic coast, Photograph by Agata Weydmann]]
 
Shores above the North Polar Circle, which are exposed for  more than  six months of freezing annually are regarded as Arctic coast (Fig. 3). Their characteristic feature is the importance of ice forms (glacial ice – growlers, sea ice – ice pack and winter local ice – ice foot)  for their ecology and evolution. Ice act as a limiting factor for the occurrence of infaunal and epifaunal organisms (ice scouring, ice melt and freezing are all stressful processes for coastal [[macrofauna]]). Even in the high Arctic, [[macrofauna]] and macroalgae can survive winter ice in rocks crevices.  In places, with very cold water, where [[permafrost]] surface at the intertidal,  the specific type of Arctic shore appears – cryolittoral, where freshwater ice forms the seabed, often covered with stones and algal debris (northernmost parts of the Siberian coast and its islands). Soft sediment Arctic coasts are eroding very fast due to the combined effect of ice melt, ice scouring and waves action.
 
 
 
===Barrier coasts===
 
[[Image:barrier coast.jpg|thumb|150px|Fig. 4. Barrier coast. Source: [http://www.dhigroup.com DHI]]]
 
Barrier islands (Fig. 4) are parallel to the shore, separated from the mainland by a lagoon. In a profile with a more gentle slope than the equilibrium profile, sediments will be moved onshore, as waves on the [[shoreface]] will primarily transport sand towards shore attempting to build up an equilibrium profile. Waves lose their energy over the gentle [[shoreface]] and deposition occurs some distance from shoreline, eventually developing into a barrier island due to the cross-shore transport. Transport of sand by [[longshore transport]] will add to barrier formation, a combination of sand spit and barrier island processes, normally occurring under type 1 and 2 conditions.
 
<!--note:link to this type 1 and 2 reference?-->
 
 
 
<u>'''Links'''</u>:
 
*[[Classification of Coastlines#Barrier Islands|Barrier islands]]
 
*[[Slapton barrier beach case study, UK]]
 
*[[Origin and Genesis of coastal barriere systems. Case study from Rømø in the Danish Wadden Sea]]
 
 
 
==See also==
 
[[Classification of Coastlines]]
 
 
 
Mangor, K. (2004).''Shoreline Management Guideline''. DHI Water and Environment, 294pg.
 
 
 
 
 
==References==
 
<references/>
 
 
 
 
 
{{author
 
 
 
|AuthorID=12941
 
|AuthorFullName=Ulrik Lumborg
 
|AuthorName=UlrikLumborg}}
 
 
 
 
 
[[Category:Theme 6]]
 
[[Category:Arctic]]
 
[[Category:Rocky shorelines]]
 
[[Category:Lagoons]]
 
[[Category:Mangroves]]
 
[[Category:Sediment shorelines]]
 
[[Category:Hydrological processes and water]]
 

Latest revision as of 19:35, 8 June 2018