Wash load

From Coastal Wiki
Revision as of 11:32, 26 November 2007 by Joanne (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Definition of Wash load:
That part of the suspended load which is composed of particle sizes smaller than those found in appreciable quantities in the bed material. It is in near-permanent

suspension and, therefore, is transported through the stream without deposition. The discharge of the wash load through a reach depends only on the rate with which these particles become available in the catchment area and not on the transport capacity of

the flow.[1].
This is the common definition for Wash load, other definitions can be discussed in the article

See also

References

  1. Rijn, L. C. van (1986). Manual sediment transport measurements. Delft, The Netherlands: Delft Hydraulics Laboratory
The main author of this article is Rijn, Leo van
Please note that others may also have edited the contents of this article.

Citation: Rijn, Leo van (2007): Wash load. Available from http://www.coastalwiki.org/wiki/Wash_load [accessed on 28-03-2024]


The main author of this article is Roberti, Hans
Please note that others may also have edited the contents of this article.

Citation: Roberti, Hans (2007): Wash load. Available from http://www.coastalwiki.org/wiki/Wash_load [accessed on 28-03-2024]