<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://www.coastalwiki.org/w/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Jatalah</id>
	<title>Coastal Wiki - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="https://www.coastalwiki.org/w/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Jatalah"/>
	<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/wiki/Special:Contributions/Jatalah"/>
	<updated>2026-11-17T22:45:27Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=36129</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=36129"/>
		<updated>2010-05-26T09:18:14Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifying the study goals including the questions to be answered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfully compared and to avoid any confound conclusion. Some geophysical variable that have to be considered when choosing for sampling sites include: wave exposure, depth, substratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similar in terms of abiotic characteristics, and then randomly choosing a subset for study from this site pool. Additionally, sampling should be focused in on habitats of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be chosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
Two fundamental aspects of sampling design for correct inference are: &#039;&#039;&#039;randomization&#039;&#039;&#039; and &#039;&#039;&#039;replication&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Randomization&#039;&#039;&#039; is the random sampling of units in terms of temporal or spatial arrangement. In a manipulative experiment randomization is the random allocation of experimental treatments to individual units. Randomization is critical for sampling design because it makes the data more likely to be independent. The random allocation of sampling unit must ensure representativeness of the entire study area. Care must be taken that replicate samples unit are not &#039;segregated&#039; in order to ensure interspersion.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Replication&#039;&#039;&#039; of sampling units within treatments or sampling sites provides a measure of variability. It is not possible to make any comparison between study sites or treatments without having appropriated replication. In addition, replication must be done at the the correct level to be able to make logical inferences. &amp;lt;ref&amp;gt;Hurlbert, S.H. 1984. Pseudoreplication and the design of ecological field experiments. Ecological Monographs 54: 187-211&amp;lt;/ref&amp;gt;   &lt;br /&gt;
  &lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be classified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studies are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple occasions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve repeated sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endangered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes responsible for them. For this, purpose descriptive (&#039;mensurative&#039;) and experimental approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=36128</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=36128"/>
		<updated>2010-05-26T09:02:33Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
The information for this article was obtained mostly from Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss often leads species to get endangered or threatened, and eventually extincted  leading to significant loss of overall diversity and changes in ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. Conservation efforts must consider the effects  habitat loss and fragmentation on all components of species diversity and the ecosystem functioning and services provided by habitas:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
There is an ongoing debate among conservationist biologist about whether is preferable to protect several already fragmented patches of habitats or a single large area, often referred as the  SLOSS (Single Large or Several Small) debate. &lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=36127</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=36127"/>
		<updated>2010-05-26T09:01:55Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
The information for this article was based on Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss often leads species to get endangered or threatened, and eventually extincted  leading to significant loss of overall diversity and changes in ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. Conservation efforts must consider the effects  habitat loss and fragmentation on all components of species diversity and the ecosystem functioning and services provided by habitas:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
There is an ongoing debate among conservationist biologist about whether is preferable to protect several already fragmented patches of habitats or a single large area, often referred as the  SLOSS (Single Large or Several Small) debate. &lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29775</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29775"/>
		<updated>2009-05-15T10:00:03Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
Two fundamental aspects of sampling design for correct inference are: &#039;&#039;&#039;randomization&#039;&#039;&#039; and &#039;&#039;&#039;replication&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Randomization&#039;&#039;&#039; is the random sampling of units in terms of temporal or spatial arrangement. In a manipulative experiment randomization is the random allocation of experimental treatments to individual units. Randomization is critical for sampling design because it makes the data more likely to be independent. The random allocation of sampling unit must ensure representativeness of the entire study area. Care must be taken that replicate samples unit are not &#039;segregated&#039; in order to ensure interspersion.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Replication&#039;&#039;&#039; of sampling units within treatments or sampling sites provides a measure of variability. It is not possible to make any comparison between study sites or treatments without having appropriated replication. In addition, replication must be done at the the correct level to be able to make logical inferences. &amp;lt;ref&amp;gt;Hurlbert, S.H. 1984. Pseudoreplication and the design of ecological field experiments. Ecological Monographs 54: 187-211&amp;lt;/ref&amp;gt;   &lt;br /&gt;
  &lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29774</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29774"/>
		<updated>2009-05-15T09:57:20Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Sampling Design */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
Two fundamental aspects of sampling design for correct inference are: &#039;&#039;&#039;randomization&#039;&#039;&#039; and &#039;&#039;&#039;replication&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Randomization&#039;&#039;&#039; is the random sampling of units in terms of temporal or spatial arrangement. In a manipulative experiment randomization is the random allocation of experimental treatments to individual units. Randomization is critical for sampling design because it makes the data more likely to be independent. The random allocation of sampling unit must ensure representativeness of the entire study area. Care must be taken that replicate samples unit are not &#039;segregated&#039; in order to ensure interspersion.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Replication&#039;&#039;&#039; of sampling units within treatments or sampling sites provides a measure of variability. It is not possible to make any comparison between study sites or treatments without having appropriated replication. In addition, replication must be done at the the correct level to be able to make logical inferences.   &lt;br /&gt;
  &lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29773</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29773"/>
		<updated>2009-05-15T09:56:34Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Sampling Design */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
Two fundamental aspects of sampling design for correct inference are: &#039;&#039;&#039;randomization&#039;&#039;&#039; and &#039;&#039;&#039;replication&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Randomization&#039;&#039;&#039; is the random sampling of units in terms of temporal or spatial arrangement. In a manipulative experiment randomization is the random allocation of experimental treatments to individual units. Randomization is critical for sampling design because it makes the data more likely to be independent. The random allocation of sampling unit must ensure representativeness of the entire study area. Care must be taken that replicate samples unit are not &#039;segregated&#039; in order to ensure a correct interspersion.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Replication&#039;&#039;&#039; of sampling units within treatments or sampling sites provides a measure of variability. It is not possible to make any comparison between study sites or treatments without having appropriated replication. In addition, replication must be done at the the correct level to be able to make logical inferences.   &lt;br /&gt;
  &lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29772</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=29772"/>
		<updated>2009-05-15T09:56:17Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Sampling Design */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
Two fundamental aspects of sampling design for correct inference are: &#039;&#039;&#039;randomization&#039;&#039;&#039; and &#039;&#039;&#039;replication&#039;&#039;&#039;.&lt;br /&gt;
&#039;&#039;&#039;Randomization&#039;&#039;&#039; is the random sampling of units in terms of temporal or spatial arrangement. In a manipulative experiment randomization is the random allocation of experimental treatments to individual units. Randomization is critical for sampling design because it makes the data more likely to be independent. The random allocation of sampling unit must ensure representativeness of the entire study area. Care must be taken that replicate samples unit are not &#039;segregated&#039; in order to ensure a correct interspersion.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Replication&#039;&#039;&#039; of sampling units within treatments or sampling sites provides a measure of variability. It is not possible to make any comparison between study sites or treatments without having appropriated replication. In addition, replication must be done at the the correct level to be able to make logical inferences.   &lt;br /&gt;
  &lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28588</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28588"/>
		<updated>2009-03-24T10:32:42Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
The information for this article was obtained from Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss often leads species to get endangered or threatened, and eventually extincted  leading to significant loss of overall diversity and changes in ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. Conservation efforts must consider the effects  habitat loss and fragmentation on all components of species diversity and the ecosystem functioning and services provided by habitas:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
There is an ongoing debate among conservationist biologist about whether is preferable to protect several already fragmented patches of habitats or a single large area, often referred as the  SLOSS (Single Large or Several Small) debate. &lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28587</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28587"/>
		<updated>2009-03-24T10:11:29Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
The information for this article was obtained from Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss often leads species to get endangered or threatened, and eventually extincted  leading to significant loss of overall diversity and changes in ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. Conservation efforts must consider the effects  habitat loss and fragmentation on all components of species diversity and the ecosystem functioning and services provided by habitas:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28499</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28499"/>
		<updated>2009-03-19T16:23:08Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
The information for this article was obtained from Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28498</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28498"/>
		<updated>2009-03-19T16:17:40Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28497</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28497"/>
		<updated>2009-03-19T16:15:09Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;This article is based on Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28448</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28448"/>
		<updated>2009-03-18T14:58:21Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt; Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity has been identified &amp;lt;ref name = Beck&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. It has been predicted that the consequences of habitat loss would probably be much more profund than than the loss of individual species, because of the ecological interactions between species leading to a chain of impacts &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 2. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats are highly productive compared to simpler habitats. They produce large amounts of nutrients and organic matter that can be directly used by other organisms as food resources. The habitat loss also implies the loss of these food resources having a negative effect in the survival of other species and the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains &amp;lt;ref name = Beck/&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;&amp;lt;ref name = Beck/&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28211</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28211"/>
		<updated>2009-03-11T16:10:25Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Biological units */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Choice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28209</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28209"/>
		<updated>2009-03-11T16:09:56Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Biological units */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Chice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28207</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28207"/>
		<updated>2009-03-11T16:09:18Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Biological units */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
[[image:biological_units.JPG|thumb|right|Fig. 1. Chice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28206</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28206"/>
		<updated>2009-03-11T16:08:59Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
[[image:biological_units.JPG|thumb|left|Fig. 1. Chice of biological units in sampling programs. Adapted from &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=File:Biological_units.JPG&amp;diff=28204</id>
		<title>File:Biological units.JPG</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=File:Biological_units.JPG&amp;diff=28204"/>
		<updated>2009-03-11T12:51:50Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: Biological sampling units adapted from Murray&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Biological sampling units adapted from Murray&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28203</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28203"/>
		<updated>2009-03-11T12:51:08Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances or percentage cover of one or more species is one of the most common approaches of sampling programs.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28202</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28202"/>
		<updated>2009-03-11T12:22:11Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled. Ideally, the biological unit to be choosen is the most ecologically informative and known causal links with the process being studied.&lt;br /&gt;
Sampling of the abundances of one or more spceies population is one of the most common approach of sampling programs. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28201</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28201"/>
		<updated>2009-03-11T12:12:57Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* See also */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see:&lt;br /&gt;
&lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28200</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28200"/>
		<updated>2009-03-11T12:10:33Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
The biological units targeted by a sampling program range from individual-based parameters such as the size of a particular fish species gonads, to species-level sampling such as estimation of percentage cover of all macroalgae species in a rocky shore, to higher taxonomic units such as the number of phyla. The sampling units to be selected will depend on the objectives of the sampling program and the available knowledge of the system being sampled.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: &lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28199</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28199"/>
		<updated>2009-03-11T09:55:13Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.jpg|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28198</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28198"/>
		<updated>2009-03-11T09:54:07Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs are an important structurally complex habitat that provide food resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Mero.JPG|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitats. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=File:Mero.jpg&amp;diff=28197</id>
		<title>File:Mero.jpg</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=File:Mero.jpg&amp;diff=28197"/>
		<updated>2009-03-11T09:52:31Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: Mero. Photo credit David Balata&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Mero. Photo credit David Balata&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=File:IMG_20462a-1.jpg&amp;diff=28196</id>
		<title>File:IMG 20462a-1.jpg</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=File:IMG_20462a-1.jpg&amp;diff=28196"/>
		<updated>2009-03-11T09:52:17Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: Mero. Photo credit David Balata&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Mero. Photo credit David Balata&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28195</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28195"/>
		<updated>2009-03-10T17:33:20Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* See also */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: &lt;br /&gt;
[[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28193</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28193"/>
		<updated>2009-03-10T17:31:25Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* &amp;#039;&amp;#039;&amp;#039;4. Pattern and process (ecological) studies&amp;#039;&amp;#039;&amp;#039; */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==See also==&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: [[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28192</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28192"/>
		<updated>2009-03-10T17:29:52Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Types of Sampling studies */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: [[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28191</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28191"/>
		<updated>2009-03-10T17:29:36Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Types of Sampling studies===&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: [[Sampling tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28190</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28190"/>
		<updated>2009-03-10T17:28:15Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: [[Sampling Tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28189</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28189"/>
		<updated>2009-03-10T17:27:19Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
===Biological units===&lt;br /&gt;
---&lt;br /&gt;
&lt;br /&gt;
===Sampling Design===&lt;br /&gt;
---&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For details of the different tools available to for sampling a range of different marine environments see: [[Sampling Tools]]&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28188</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28188"/>
		<updated>2009-03-10T17:23:29Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories: &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;1. Baseline studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;2. Impact studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== &#039;&#039;&#039;3. Monitoring studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;&#039;4. Pattern and process (ecological) studies&#039;&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28187</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28187"/>
		<updated>2009-03-10T17:20:34Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
# &#039;&#039;&#039;Baseline studies&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
# &#039;&#039;&#039;Impact studies&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
# &#039;&#039;&#039;Monitoring studies&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
# &#039;&#039;&#039;Pattern and process (ecological) studies&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28186</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28186"/>
		<updated>2009-03-10T17:17:58Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Site selection===&lt;br /&gt;
----&lt;br /&gt;
Site selection is an important decision in any sampling program and it should be based  to the study objectives. Because most sampling program involves comparisons among sites, they should be physically similar in order to meaningfuly compared and to avoid any confound conclusion. Some geophysicfal variable that have to be cosnidered when choosing for sampling sites include: wave exposure, depth, sustratum type and slope, topographical heterogeneity, salinity and the degree of human or natural perturbation.&lt;br /&gt;
Site selection protocols should involve identifying a set of sites that are similiar in terms of abiotic characteristics, and then randomly choosing a subset for study from thsi site pool. Additionally, sampling should be focused in on habitas of high value or to high sensitivity to suspected stressors and, if it is useful to consider trends over a large region, on habitats that are broadly present.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28185</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28185"/>
		<updated>2009-03-10T16:57:04Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are &amp;lt;ref&amp;gt;Murray SN, Ambrose RF, Dethier MN (2006) Monitoring rocky shores, Vol. University Of California Press, Berkeley and Los Angeles, California &amp;lt;/ref&amp;gt;:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28184</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28184"/>
		<updated>2009-03-10T16:52:53Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Monitoring studies */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programs in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve.&lt;br /&gt;
Some key aspects of an effective monitoring program are:&lt;br /&gt;
* It must be carried out over a long periods and designed to account the natural variability of the system. &lt;br /&gt;
* It must be designed using the best available ecological concepts, study design, and principles.&lt;br /&gt;
* The data must be collected in a consisted and well-documented manner to achive required continuity and reliability.&lt;br /&gt;
* The program should be designed to detect changes and impacts based on sound statistical analyses.&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28183</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28183"/>
		<updated>2009-03-10T16:24:06Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Effects of habitat loss on biodiversity */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|left|Fig. 3. Coral reefs an important structurally complex habitat that provide foord resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Sfondo1.JPG|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitas. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28182</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28182"/>
		<updated>2009-03-10T16:23:52Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Effects of habitat loss on biodiversity */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|center|Fig. 3. Coral reefs an important structurally complex habitat that provide foord resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Sfondo1.JPG|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitas. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28181</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28181"/>
		<updated>2009-03-10T16:22:30Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Implications for conservation and management */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|right|Fig. 3. Coral reefs an important structurally complex habitat that provide foord resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:Sfondo1.JPG|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitas. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28180</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28180"/>
		<updated>2009-03-10T16:22:04Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Implications for conservation and management */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|right|Fig. 3. Coral reefs an important structurally complex habitat that provide foord resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|right|Fig. 3. No take marine reserves are one of the most effective managment tools to protect endangered habitas. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=File:Sfondo1.JPG&amp;diff=28179</id>
		<title>File:Sfondo1.JPG</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=File:Sfondo1.JPG&amp;diff=28179"/>
		<updated>2009-03-10T16:18:52Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: Photo credit Dr. David Balata&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Photo credit Dr. David Balata&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28178</id>
		<title>Habitat destruction and fragmentation</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Habitat_destruction_and_fragmentation&amp;diff=28178"/>
		<updated>2009-03-10T16:16:27Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: /* Effects of habitat loss on biodiversity */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Habitat]] destruction and fragmentation is a process that describes the emergences of discontinuities (fragmentation) or the loss (destruction) of the environment inhabited by an organism. Marine [[ecosystem]]s are experiencing high rates of habitat loss and degradation, and these processes are considered as the most critical threat to marine biodiversity &amp;lt;ref&amp;gt;Gray, J.s. 1997. Marine biodiversity: patterns, threats and conservation needs. Biodiversity and Conservation 6, 153-175&amp;lt;/ref&amp;gt;. It is estimated that every day between 1960 and 1995, a kilometer of coastline was developed, causing permanent losses of valuable habitats, such as coastal wetlands, [[seagrass meadows]] and [[rocky shores]] &amp;lt;ref&amp;gt;Airoldi, L., Beck, W.M. 2007. Loss, status and trends for coastal marine habitats of Europe. Oceanogr. Marine Biology Annual Review 45, 345–405.&amp;lt;/ref&amp;gt;. Approximately 20% of the world’s coral reefs were lost and an additional 20% degraded in the last several decades of the twentieth century, and approximately 35% of mangrove area was lost during this time&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Habitat can be defined as predominant features that create structural complexity in the environment, such as plants (e.g., [[seagrass meadows]], [[kelp forests]]), or animals (e.g. &#039;&#039;Sabellaria&#039;&#039; reefs, burrowing fauna in sandflats).&lt;br /&gt;
&lt;br /&gt;
[[image:Kelp_forest.JPG|thumb|right|Fig. 1. Marine habitats in Europe, such as kelp forests, support a high diversity of marine life and are threatened by human activity. Photo © BIOMAR]]&lt;br /&gt;
&lt;br /&gt;
== Habitat loss and biodiversity ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Researchers have identified three major components of habitat loss that relates to species diversity &amp;lt;ref&amp;gt;Airoldi, L., Balata, D., Beck, M.W. 2008. The Gray Zone: Relationships between habitat loss and marine diversity and their applications in conservation. Journal of Experimental Marine Biology and Ecology 366, 8-15.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:Barren.jpg |thumb|right|Fig. 1. The loss of habitats can lead to the formation of barren areas where only few species are able to survive. Photo © NOAA]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1) &#039;&#039;&#039;The loss of resident species.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
There is a unique plant and animal diversity living in close association with specifics habitats or habitat forming species. For example, invertebrate assemblages associated with mussel beds, epiphytic and epibenthic assemblages communities living in kelp forests or fish communities associated with coral reefs. The risk of diversity loss associated with the destruction of these habitats has been estimated using several ecological models, e.g. species-area curves. However, in general it is predicted that the effect of habitat loss is likely to be synergistic, rather than the sum of the loss of individual species, because of the interaction between species leading to a chain of impacts.&lt;br /&gt;
&lt;br /&gt;
2) &#039;&#039;&#039;The loss of food resources.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Most biogenic habitats such as kelp forests, seagrass meadows, and other vegetated habitats and their associated organisms are known to be highly productive compared to structurally simpler habitats such as sandy habitats. They export a large amount of nutrients and particulate matter to coastal food webs either through direct transfer of animal biomass (i.e. predation, movements of individuals) or indirectly through dissolved and particulate organic. The loss of these food resources can negatively affect the productivity of individual species or communities, with more profound effects that are likely to propagate along food chains.&lt;br /&gt;
&lt;br /&gt;
3) &#039;&#039;&#039;The loss of ecosystem functions provided by the habitat.&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Structurally complex habitats provide a wide range of ecosystem functions to the environment including food and refuge provision for other species, trapping sediment, modifying light and hydrodynamic conditions, providing resilience to the system. When the habitats are lost this functions are lost with them &amp;lt;ref&amp;gt; Dobson, A., Lodge, D., Alder, J., Cumming, G.S., Keymer, J., Mcglade, J., Mooney, H., Rusak, J.A., Sala, O., Wolters, V., Wall, D., Winfree, R., Xenopoulos, M.A. 2006. Habitat loss, trophic collapse, and the decline of ecosystem services. Ecology 87, 1915–1924.&amp;lt;/ref&amp;gt;. For example, the replacement of macroalgal canopies by turfs affects sediment dynamics on rocky coasts, where fronds prevents accumulation of sediments while turfs tend to trap sediments even on exposed coasts.&lt;br /&gt;
&lt;br /&gt;
== Effects of habitat loss on biodiversity ==&lt;br /&gt;
&lt;br /&gt;
[[image:coral.JPG|thumb|right|Fig. 3. Coral reefs an important structurally complex habitat that provide foord resources and refuge to many fish species. Photo © David Balata]]&lt;br /&gt;
&lt;br /&gt;
Habitat loss has been generally associated to drastic declines in overall abundance and diversity of marine organisms. For example, in the Wadden Sea, the destruction of biogenic habitats has caused the regional extinction of at least 26 species during the past 2000 years &amp;lt;ref&amp;gt;Wolff, W.J. 2000. Causes of extirpations in the Wadden Sea, an estuarine area in the Netherlands. Conservation Biology. 14, 876–885.&amp;lt;/ref&amp;gt;. Similarly, the loss of seagrass meadows results in a reduction in the number of species and abundance of fishes.&lt;br /&gt;
Generally, the environmental changes associated with the destruction of natural habitats promote the arrival and colonization of opportunistic species that can benefit from conditions in disturbed condition. One example is the expansion of opportunistic green ephemeral algae or turf forming algae following the destruction of removal of canopy forming species, such as kelp. Other species that can favor from disturbed habitats condition are alien species. Once alien species are established they can contribute further to reduce local diversity by interacting with native species.&lt;br /&gt;
&lt;br /&gt;
== Human activities as driver of habitat loss==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Some anthropogenic activities responsible for habitat destruction include the construction of coastal protection, land reclamation, aggregate (sand and gravel) extraction, recreation and developments including ports, harbours and industries. Additionally, the growing number of tourists presents a significant threat to many coastal habitats in Europe, which can disturb by trampling or direct harvesting. In offshore waters, exploration and development of oil and gas activities threaten marine habitats, mainly with discharges of oil and other pollutants. Physical damage to marine habitats can result from fishing activities such as [[bottom trawling]]. Deep-water trawlers use heavy rock-hopping equipment, which has been reported to cause long-term to seabed habitats such as cold-water coral reefs in Norwegian, Scottish and Irish waters.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Implications for conservation and management ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Habitat loss leads to significant changes in species diversity species, community composition and structure, and ecosystem functioning. Conservation efforts of coastal and marine habitats have been driven in part by the effects of habitat loss on declines in species richness. However, looking at the effect of habitats loss on species richness is not sufficient. To comprehensively inform management actions, we must also understand how habitat loss affects all components of species diversity and the ecosystem functions and services that diversity provides across all four major classes:&lt;br /&gt;
&lt;br /&gt;
* regulating services such as shoreline buffering from storms&lt;br /&gt;
* provisioning services such as fish production&lt;br /&gt;
* cultural services such as tourism&lt;br /&gt;
* supporting services such as primary production&amp;lt;ref&amp;gt;Millennium Ecosystem Assessment, 2005. Ecosystems and Human Well-being: Synthesis. Island Press, Washington, DC &amp;lt;/ref&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
There is an urgent need for the implementation of long-term and large scale monitoring programs of changes to marine habitats and species distributions. This monitoring should be coupled with studies designed to treat management actions that result in habitat loss as large-scale experiments. For example, the use of [[MPAs (Marine Protected Areas)|marine protected areas]] (MPAs) and [[marine reserves]] as tools to underpinned the relationships between the functionality of habitats and the distribution and abundance of target taxa. According to the Global Biodiversity Asessment &amp;lt;ref&amp;gt;Heywood, V.H. (ed) 1995. The Global Biodiversity Assessment. United Nations Environment Programme. Cambridge University Press, Cambridge. 1140 pp.&amp;lt;/ref&amp;gt; the most effective way to conserve biodiversity, by almost any reckoning is to prevent the conversion or degradation of habitat.&lt;br /&gt;
&lt;br /&gt;
One important aspect that also needs to be considered is habitat restoration. On land&lt;br /&gt;
there is a long tradition of restoring habitats, such as mining waste tips. There are some&lt;br /&gt;
examples of habitat restoration in the marine environment, such as the well-publicized&lt;br /&gt;
clean-up of the River Thames in the UK where salmon can now be found in London. The&lt;br /&gt;
developing science of restoration ecology should be a part of a strategy for conservation of coastal biodiversity.&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Jatalah}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=File:Coral.JPG&amp;diff=28177</id>
		<title>File:Coral.JPG</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=File:Coral.JPG&amp;diff=28177"/>
		<updated>2009-03-10T16:13:30Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: Photo credit Dr. David Balata&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Photo credit Dr. David Balata&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28176</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28176"/>
		<updated>2009-03-10T16:10:09Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. Results can be used to produce a record of a baseline condition prior to a given perturbation. Another goal of one-off study is to stablish a baseline for the system against which any future impact can be tested. The lack of temporal replication in baseline studies does not allow to quantify natural variability in biological parameters and, thus, to distinguish future changes from a particular stressor from those related to natural variations. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28175</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28175"/>
		<updated>2009-03-10T15:30:40Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, lay out, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28174</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28174"/>
		<updated>2009-03-10T15:21:36Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, layaout, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
----&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28173</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28173"/>
		<updated>2009-03-10T15:21:13Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, layaout, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
===Baseline studies===&lt;br /&gt;
----&lt;br /&gt;
Data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. &lt;br /&gt;
&lt;br /&gt;
===Impact studies===&lt;br /&gt;
----&lt;br /&gt;
Impact studeis are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
===Monitoring studies===&lt;br /&gt;
----&lt;br /&gt;
These are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===Pattern and process (ecological) studies===&lt;br /&gt;
These studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28172</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28172"/>
		<updated>2009-03-10T15:19:01Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, layaout, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Baseline studies&#039;&#039;&#039;: data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Impact studies&#039;&#039;&#039;: are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; Another commonly used sampling design is the gradient design where sites are distributed ar various distances from a central impact sites, creating a gradient and of control and impact conditions.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Monitoring studies&#039;&#039;&#039;: are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Pattern and process (ecological) studies&#039;&#039;&#039;: these studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
	<entry>
		<id>https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28171</id>
		<title>Sampling</title>
		<link rel="alternate" type="text/html" href="https://www.coastalwiki.org/w/index.php?title=Sampling&amp;diff=28171"/>
		<updated>2009-03-10T15:16:29Z</updated>

		<summary type="html">&lt;p&gt;Jatalah: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{incomplete}}&lt;br /&gt;
&lt;br /&gt;
Field sampling programs provide the information needed to determine the status and dynamics of populations and communities and thus are the basis for many kind of research. The physical and biological complexity and dynamism of most marine ecosystems results in high spatial and temporal variability in almost any measured parameter. Sampling methods and procedures need to be carefully analysed and selected so as to take into account this high variability of most marine systems.&lt;br /&gt;
&lt;br /&gt;
The steps in designing a field sampling program include:&lt;br /&gt;
&lt;br /&gt;
* Identifiying the study goals including the questions to be anwered by the study or the hypothesis to be tested.&lt;br /&gt;
* Developing and effective and statistically powerful study design.&lt;br /&gt;
&lt;br /&gt;
These steps are followed by selecting study sites, the biological units to be sampled, the sampling design, layaout, and units to be employed, and the type of data to be obtained.&lt;br /&gt;
&lt;br /&gt;
Field sampling studies can be clasified into four categories &amp;lt;ref&amp;gt; Kingsford M, Battershill C (1998) Studying temperate environments. Canterbury University Press, Christchurch, New Zealand, 335 pp.&amp;lt;/ref&amp;gt;:&lt;br /&gt;
&lt;br /&gt;
[[image:sampling.JPG|thumb|right|Fig. 1. Field sampling studies provide crucial information to determine the status and dynamics of marine population and communities. Photo © J.Atalah]]&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Baseline studies&#039;&#039;&#039;: data are collected to define the present state of a biological population or community. They are also called &amp;quot;&#039;&#039;one-off&#039;&#039;&amp;quot; studies, because by definition, they are not replicated in time. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Impact studies&#039;&#039;&#039;: are designed to determine the changes brought about a particular disturbance or stressor by comparing the status of natural or unimpacted biological parameters with their status under unimpacted conditions. Green’s &amp;lt;ref&amp;gt; Green, R. H., 1979 Sampling design and statistical methods for environmental biologists. Wiley, New York.&amp;lt;/ref&amp;gt; work on impact sampling design was pioneer in the development of impact assessment studies and statistical methods. Since then various authors has discuss the advantages and disadvantages of different impact study designs. &amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Osenberg, C. W. &amp;amp; R. J. Schmitt, 1996. Detecting ecological impacts caused by human activities. In Schmitt, R. J. &amp;amp; C. W. Osenberg (eds.), Detecting ecological impacts:  Concepts and applications in coastal habitats. Academic Press, San Diego: 3-16.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.Ellis, J. I. &amp;amp; D. C. Schneider, 1997. Evaluation of a gradient sampling design for environmental impact assessment. Environmental Monitoring and Assessment 48: 157-172.&amp;lt;/ref&amp;gt;. Several sampling designs has been used in performing field studies to test impacts. One of the most robust and commonly used is the asymmetrical BACI design (before-after control impact design), where data are colleted on multiple ocassions from both before and after an impact, usually from one impact and several controls sites.&amp;lt;ref&amp;gt;Underwood, A. J., 1991. Beyond Baci - Experimental-Designs for Detecting Human Environmental Impacts on Temporal Variations in Natural-Populations. Australian Journal of Marine and Freshwater Research 42: 569-587.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1992. Beyond BACI: The detection of environmental impacts on populations in the real, but variable world. Journal of Experimental Marine Biology and Ecology 161: 145-178.&amp;lt;/ref&amp;gt; &amp;lt;ref&amp;gt;Underwood, A. J., 1994. On Beyond BACI: Sampling Designs that Might Reliably Detect Environmental Disturbances. Ecological Applications 4: 3-15.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Monitoring studies&#039;&#039;&#039;: are designed to detect any changes from the present state. By definition, monitoring studies involve reapeted sampling in time. Monitoring programms in marine environments have focused on chemical, physical, and biological parameters, for example detecting microbial contamination of beaches, determining the concentration of potential harmful material on fish, estimating the population abundance of an endagered species inside a marine reserve. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;Pattern and process (ecological) studies&#039;&#039;&#039;: these studies involve describing distribution and abundance patterns of organisms, with the intention of identifying the processes resposible for them. For this, prupose descritive (&#039;mensurative&#039;) and experiemntal approaches should be used. &amp;lt;ref&amp;gt; Andrew NL, Mapstone BD (1987) Sampling and the description of spatial patterns in marine ecology. Oceanography and Marine Biology: An Annual Review 25: 39-90 &amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
==References==&lt;br /&gt;
&amp;lt;references/&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{{author&lt;br /&gt;
|AuthorID=19217&lt;br /&gt;
|AuthorFullName=Atalah, Javier&lt;br /&gt;
|AuthorName=Javier}}&lt;/div&gt;</summary>
		<author><name>Jatalah</name></author>
	</entry>
</feed>