Difference between revisions of "Nearshore sandbars"

From Coastal Wiki
Jump to: navigation, search
(19 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
It is recommended to read this article in conjunction with the article [[Shoreface profile]].
 +
 +
  
 
==Introduction==
 
==Introduction==
[[File:WaveTransformation.jpg|thumb|left|400px|Fig. 1. Wave transformation in the nearshore zone.]]
+
[[File:WaveTransformation.jpg|thumb|left|400px|<small>Fig. 1. Wave transformation in the nearshore zone. </small>]]
  
  
 +
Nearshore sandbars, also called breaker bars, are a common feature of the surf zone of sandy coasts subject to energetic wave action. Their occurrence is related to the shoreface slope, which should be smaller than about 1/30<ref>Davidson-Arnott, R. 2022. Nearshore Bars. Treatise on Geomorphology, 2nd edition, Volume 8, Ch. 10. Elsevier</ref>. They are the result of the dynamic interaction between the shape of the coastal profile and the transformation of waves as they propagate onshore; at the same time, they are an important agent in this interaction<ref>Wright, L.D. and Short, A.D. 1984. Morphodynamic variability of surf zones and beaches – a synthesis. Mar. Geol. 56: 93–118</ref>. Their presence promotes the breaking of waves further away from the shoreline; they thus reduce the wave forces exerted directly on the shore<ref>Quartel, S., Kroon, A. and Ruessink, B.G. 2008. Seasonal accretion and erosion patterns of a microtidal sandy beach. Mar. Geol. 250: 19–33</ref>. The cartoon of Fig. 1 shows a typical example of the transformation and breaking of incident waves in the nearshore zone. 
  
 
+
Under high-energy wave conditions, nearshore sandbars tend to be straight, with a parallel orientation to the coast, or at a small angle to the shoreline. Sandbars close to the shore can break up into smaller sandbars with crescentic shapes under less energetic wave conditions. This usually occurs in conjunction with the development of a rip cell system, as described in the articles [[Rip current]] and [[Rhythmic shoreline features]].  
Nearshore sandbars, also called breaker bars, are a common feature of the surf zone of sandy coasts worldwide. They are the result of the dynamic interaction between the shape of the coastal profile and the transformation of waves as they propagate onshore; at the same time they are an important agent in this interaction<ref>Wright, L.D. and Short, A.D. 1984. Morphodynamic variability of surf zones and beaches – a synthesis. Mar. Geol. 56: 93–118</ref>. Their presence promotes the breaking of waves further away from the shoreline; they thus reduce the wave forces exerted directly on shore<ref>Quartel, S., Kroon, A. and Ruessink, B.G. 2008. Seasonal accretion and erosion patterns of a microtidal sandy beach. Mar. Geol. 250: 19–33</ref>. The cartoon of Fig. 1 shows a typical example of the transformation and breaking of incident waves in the nearshore zone.
 
 
<br clear=all>
 
<br clear=all>
  
 
==Bar formation==
 
==Bar formation==
Bar formation can be explained as resulting from the prevalence of onshore sand transport by incident waves before breaking and the prevalence of offshore transport after breaking<ref name=D84>Dally, W.R. and Dean, R.G. 1984. Suspended sediment transport and beach profile evolution. J. Waterw. Port Coast. Ocean Eng. ASCE 110: 15–33</ref>. Onshore transport prior to breaking is due to the interaction of the shoaling wave with the seabed that generates higher velocities and stronger acceleration of onshore wave orbital motion compared to offshore wave orbital motion<ref>Elgar, S., Gallagher, E.L. and Guza, R.T. 2001. Nearshore sandbar migration. J. Geophys. Res. 106 (C6), 11623</ref><ref>van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017. Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92</ref> (Fig. 2). Offshore transport is due to wave breaking that produces strong turbulence and uplift of sand from the seabed that is transported seaward by so-called undertow (the return flow compensating for the onshore Stokes' mass transport)<ref>Zhang, D.P. and Sunamura, T. 1994. Multiple bar formation by breaker-induced vortices: a laboratory approach. In: Proc. Intern. Conf. Coast. Eng., pp. 2856–2870</ref><ref>Thornton, E.B., Humiston, R.T.and Birkemeier, W. 1996. Bar/trough generation on a natural beach. J. Geophys. Res. Oceans 101 (C5): 12097–12110</ref><ref>Gallagher, E.L., Elgar, S.and Guza, R.T. 1998. Observations of sand bar evolution on a natural beach. J. Geophys. Res.: Oceans 103 (C2): 3203–3215</ref>.  
+
 
 +
[[File:BarFormation.jpg|thumb|left|350px|<small>Fig. 2. Profiles (green and blue) schematically representing two successive stages of bar formation by wave breaking on an initially non-barred shoreface (red). Adapted after <ref name=GM22>García-Maribona, J., Lara, J.L., Maza, M. and Losada, I.J. 2022. Analysis of the mechanics of breaker bar generation in cross-shore beach profiles based on numerical modelling. Coastal Engineering 177, 104172</ref>. </small>]]
 +
 
 +
Understanding sandbar dynamics has greatly progressed thanks to the development of the [[Argus video monitoring system]], which allows continuous observation of the presence and migration of sandbars under a wide variety of conditions. Nevertheless, the behavior of sandbars is not yet fully understood and subject of ongoing research. Laboratory experiments<ref>Roelvink, D. and Stive, M.J.F., 1989. Bar-generating cross-shore flow mechanisms on a beach. J. of Geophys. Res. Oceans 94: 4785–4800</ref><ref>Baldock, T.E., Alsina, J.A., Caceres, I., Vicinanza, D., Contestabile, P., Power, H. and Sanchez-Arcilla, A. 2011. Large-scale experiments on beach profile evolution and surf and swash zone sediment transport induced by long waves, wave groups and random waves. Coast. Eng. 58: 214–2</ref><ref>Eichentopf, S., Van der Zanden, J., Cacere, I. and Alsina, J.M. 2019. Beach profile evolution towards equilibrium from varying initial morphologies. J. Mar. Sci. Eng. 7: 406</ref> and process-based morphodynamic modeling<ref name=D84>Dally, W.R. and Dean, R.G. 1984. Suspended sediment transport and beach profile evolution. J. Waterw. Port Coast. Ocean Eng. ASCE 110: 15–33</ref><ref>Jacobsen, N.G., Fredsoe, J. and Jensen, J.H. 2014. Formation and development of a breaker bar under regular waves. Part 1: Model description and hydrodynamics. Coastal Eng. 88: 182-193</ref><ref>Li, Y., Zhang, C., Chen, D., Zheng, J., SunJ. and Wang, P. 2021. Barred beach profile equilibrium investigated with a process-based numerical model. Continental Shelf Research 222: 104432</ref> show that nearshore sandbars can develop as a result of wave breaking on a non-barred shoreface. Onshore sand transport by incident waves is prevalent before breaking and offshore transport after breaking. Thus, an initial bar is formed by breaker-induced convergence of sediment transport just seaward of the breakpoint and an associated trough at the initial breakpoint. The initial bar will force the breakpoint further down the shoreface and the initial bar will follow until reaching a position where the breaker-induced offshore sand transport is weakened and in equilibrium with wave-induced onshore transport (Fig. 2). This mechanism illustrates that gently sloping shorefaces subject to vigorous wave breaking will usually exhibit a barred profile. Field and laboratory observations show that in the bar crest region the sediment grain size is greater than in the shoreward trough<ref name=ZA>van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017.  Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92</ref>. In the case of a stationary wave climate, the processes that initiate bar formation also contribute to bar growth. Over time, however, they are gradually overruled by other processes that limit bar growth, such as gravity-induced sediment transport down the bar slopes<ref name=ZA>van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017.  Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92</ref>. In situations of less intense wave breaking the bar will not grow high but take the form of a terrace<ref>Wright, L. D., Short, A. D. and Green, M. O. 1985. Short-term changes in the morphodynamic states of beaches and surf zones: An empirical predictive model Mar. Geol. 62: 339–364</ref><ref>Scott, T., Masselink, G. and Russell, P. 2011. Morphodynamic characteristics and classification of beaches in England and Wales. Marine Geology 286: 1–20</ref>.
 +
 
 +
==Underlying processes==
 +
A variety of physical processes are involved in bar formation. The nonlinear interaction of the shoaling wave with the seabed prior to breaking generates higher velocities and stronger acceleration of onshore wave orbital motion compared to offshore wave orbital motion (so-called 'skewness' of wave orbital velocity and acceleration)<ref>Elgar, S., Gallagher, E.L. and Guza, R.T. 2001. Nearshore sandbar migration. J. Geophys. Res. 106 (C6), 11623</ref>. The onshore wave orbital motion strongly accelerates when the wave boundary layer is still thin and so creates a strong bed shear stress that entrains seabed particles<ref>Nielsen, P., 1992. Coastal Bottom Boundary Layers and Sediment Transport. World Scientific, Singapore</ref>. Seabed particles can also be set in onshore motion by the pressure gradient under the steep wave front<ref>Foster, D. L., Bowen, A.J., Holman, R.A. and Natoo, P. 2006. Field evidence of pressure gradient induced incipient motion. J. Geophys. Res. 111: C05004</ref>. These various processes generate net onshore bedload transport in the wave boundary layer<ref>van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017. Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92</ref> (Fig. 3). The skewness of the wave orbital velocity and acceleration is reduced after wave breaking and therefore contributes less to onshore sediment transport in the surf zone on the shoreward side of the breakpoint. Offshore sediment transport on the shoreward side of the breakpoint is mainly due to the undertow current (the net return flow in the water column compensating for the onshore mass transport in the upper part of the water column between wave trough and crest). The undertow induces strong offshore transport as it is loaded with sediment lifted from the seabed by the turbulence produced by wave breaking, especially for plunging breakers<ref>Zhang, D.P. and Sunamura, T. 1994. Multiple bar formation by breaker-induced vortices: a laboratory approach. In: Proc. Intern. Conf. Coast. Eng., pp. 2856–2870</ref><ref>Thornton, E. B., Humiston, R. T. and Birkemeier, W. 1996. Bar/trough generation on a natural beach. J. Geophys. Res. 101: 12,097–12,110</ref><ref>Gallagher, E.L., Elgar, S.and Guza, R.T. 1998. Observations of sand bar evolution on a natural beach. J. Geophys. Res.: Oceans 103 (C2): 3203–3215</ref>. Seabed stirring and sediment resuspension landward of the breakpoint can be further enhanced by [[longshore current]]s induced by obliquely incident breaking waves<ref>Walstra, D. J. R., Reniers, A. J. H. M., Ranasinghe, R., Roelvink, J. A. and Ruessink, B. G. 2012. On bar growth and decay during interannual net offshore migration. Coastal Eng. 60: 190–200</ref>. The wave orbital motion also contributes to seaward transport as the highest sediment resuspension occurs during flow reversal from wave trough to wave crest<ref name=ZA>van der Zanden, J., van der A, D.A., Hurther, D., Cáceres, I., O’Donoghue, T. and Ribberink, J.S. 2017. Suspended sediment transport around a large-scale laboratory breaker bar. Coastal Engineering 125: 51–69</ref>. Under energetic waves, suspended load transport dominates over bedload transport in the wave breaking zone and in the surf zone, whereas bedload transport dominates in the wave shoaling zone (Fig. 4).
 +
 
  
  
Line 16: Line 26:
 
|-
 
|-
 
| valign="top"|
 
| valign="top"|
[[File:WaveAsymmetry.jpg|thumb|right|400px|Fig. 2. Onshore-offshore asymmetry of the wave orbital velocity and acceleration in the shoaling zone. The maximum onshore orbital velocity in the wave crest phase is substantially larger than the maximum offshore orbital velocity in the wave trough phase (sometimes called positive skewness). The acceleration of offshore to onshore wave orbital velocities is also substantially larger than the acceleration in the opposite direction (sometimes called positive asymmetry). In most cases this will induce net onshore sand transport, although in some cases the opposite may also happen (see [[Sediment transport formulas for the coastal environment]]).]]     
+
[[File:WaveAsymmetry.jpg|thumb|right|400px|<small>Fig. 3. Onshore-offshore asymmetry of the wave orbital velocity and acceleration in the shoaling zone. The acceleration of offshore to onshore wave orbital velocities is substantially larger than the acceleration in the opposite direction (sometimes called positive acceleration skewness or asymmetry). The maximum onshore orbital velocity in the wave crest phase is also substantially larger than the maximum offshore orbital velocity in the wave trough phase (sometimes called positive velocity skewness). In most cases this will induce net onshore sand transport, although in some cases the opposite may also happen (see [[Sediment transport formulas for the coastal environment]]). </small>]]     
 
| valign="top"|
 
| valign="top"|
[[File:EgmondBars.jpg|thumb|left|450px|Fig. 3. Cross-shore depth profiles of the surf zone at Egmond, North-Holland coast (Netherlands) showing a system of multiple nearshore bars at 4 different years. The bar crests move in offshore direction while the outer bar decays at the seaward limit of the surf zone at 8 m depth.]]
+
[[File:BarFormationTransports.jpg|thumb|left|400px|<small>Fig. 4. Schematic of the major bar-building sediment transport processes. Adapted after <ref name=GM22>García-Maribona, J., Lara, J.L., Maza, M. and Losada, I.J. 2022. Analysis of the mechanics of breaker bar generation in cross-shore beach profiles based on numerical modelling. Coastal Engineering 177, 104172</ref>. </small>]]
 
|}
 
|}
  
 
==Bar migration==
 
==Bar migration==
Nearshore bars are not static features but move in onshore or offshore direction depending on the wave climate. Ruessink and Terwindt, 2000<ref>Ruessink, B.G. and Terwindt, J.H.J. 2000. The behaviour of nearshore bars on the time scale of years: A conceptual model. Mar. Geol. 163: 289–302</ref>) found that on the Dutch coast bars migrate offshore under energetic waves (storm periods), while under mild waves (long-period waves, swell, non-breaking onshore propagating surf bores) the migration direction is onshore. This study also showed that offshore migration dominates when <math>H_s/d</math> (ratio of significant wave height <math>H_s</math> to water-depth-above-crest <math>d</math>) is larger than 0.6 and onshore migration when this ratio is smaller than 0.3.
 
  
During storm periods, large offshore bar displacements can occur in a short time. Landward bar migration is much slower; long periods of onshore motion are required to offset the seaward migration of a single high-wave period<ref> Wijnberg, K.M. and Kroon, A. 2002. Barred beaches. Geomorphology 48: 103–120</ref>. Most observations indicate a long-term net offshore migration<ref name=A17>Aleman, N., Certain, R., Robin, N. and Barusseau, J-P. 2017. Morphodynamics of slightly oblique nearshore bars and their relationship with the cycle of net offshore migration. Marine Geology 392: 41–52</ref> (Fig. 3), but on some coasts the bar location is on average stable or migrates in a landward direction<ref name=A4>Aagaard, T., Davidson-Arnott, R., Greenwood, B. and Nielsen, J. 2004. Sediment supply from shoreface to dunes: linking sediment transport measurements and long-term morphological evolution. Geomorphology 60: 205–224</ref>. During long periods of swell-dominated conditions the bar eventually welds to the shoreline<ref> Shepard, F.P. 1950. Beach cycles in southern California. In: Beach Erosion Board (Technical Memo 20). US Army Corps of Engineering, Washington DC.</ref>. In situations where the net bar migration is directed offshore, the bar eventually decays when the water depth above the crest becomes too large to induce frequent wave breaking and convergence of sand transport<ref>Birkemeier, W.A. 1984. Time scales of nearshore profile changes. In: 19th International Conference on Coastal Engineering. American Society of Civil Engineers, New York, pp. 1507-1521</ref><ref>Ruessink, B.G. and Kroon, A. 1994. The behaviour of a multiple bar system in the nearshore zone of Terschelling, The Netherlands. Marine Geology 121: 187–197</ref>. When this outer bar decays, energetic incident waves reach more easily the intertidal beach and are capable to remove sand for generating a new bar that subsequently starts moving offshore. However, at some coasts, observations show the generation of an outer bar offshore at the location where energetic incident waves start breaking on the shoreface<ref>Plant, N.G., Freilich, M.H. and Holman, R.A. 2001. Role of morphodynamic feedback in surf zone sandbar response. J. Geophys. Re. 106: 973-989</ref><ref name=A4/><ref>Jacobsen, N.G., Fredsoe, J. and Jensen, J.H. 2014. Formation and development of a breaker bar under regular waves. Part 1: Model description and hydrodynamics. Coastal Eng. 88: 182-193</ref>. The onshore bar migration is often complex due to the formation of bar-rip systems with a longshore rhythmic variation, described more in detail in the article [[Rhythmic shoreline features]]. Longshore sand transport processes also play an important role in the generation and evolution of sandbars<ref>Thornton, E.B., Humiston, R.T. and Birkemeier, W. 1996. Bar/trough generation on a natural beach. J. Geophys. Res. 101: 21-97-12110</ref><ref>Walstra, D.J.R., Reniers, A.J.H.M., Ranasinghe, R., Roelvink, J.A. and Ruessink, B.G. 2012. On bar growth and decay during inter-annual net offshore migration. Coast Eng. 60: 190–200</ref>.
+
[[File:SkallingenEgmondBars.jpg|thumb|left|450px|<small>Fig. 5. Cross-shore depth profiles of the surf zone at Skallingen <ref name=A4>Aagaard, T., Davidson-Arnott, R., Greenwood, B. and Nielsen, J. 2004. Sediment supply from shoreface to dunes: linking sediment transport measurements and long-term morphological evolution. Geomorphology 60: 205–224</ref> (Denmark) and Egmond <ref>Van Rijn, L.C., Ruessink, B.G. and Mulder, J.P.M. 2002. Summary of project results. In: Coast3D-Egmond, The behaviour of a straight sandy coast on the time scale of storms and seasons. ISBN 90-800356-5-3-, Aqua Publ. Amsterdam</ref> (Netherlands) showing systems of multiple nearshore bars at different years. For both, 0 m depth corresponds approximately to mean sea level. At Skallingen the bar crests move in onshore direction, whereas at Egmond the bar crests move in offshore direction. At Egmond, the outer bar decays at the seaward limit of the surf zone at 8 m depth. Both coasts are storm-dominated. Symbols: median grain size <math>\small d_{50}</math> [mm], mean significant wave height <math>\small H_s</math> [m], mean wave period <math>\small T</math> [s], tidal range <math>\small TR</math> [m]. </small>]]
 +
 
 +
Nearshore sandbars are not static features but move in onshore or offshore direction depending on the wave climate. Ruessink and Terwindt, 2000<ref>Ruessink, B.G. and Terwindt, J.H.J. 2000. The behaviour of nearshore bars on the time scale of years: A conceptual model. Mar. Geol. 163: 289–302</ref>) found that on the Dutch coast bars migrate offshore under energetic waves (storm periods), while under mild waves (long-period waves, swell, non-breaking onshore propagating surf bores) the migration direction is onshore. This study also showed that offshore migration dominates when <math>\Gamma \equiv (H_s/h)_{crest}</math> (ratio of significant wave height <math>H_s</math> to water-depth-above-barcrest <math>h</math>) is larger than a critical value <math>\Gamma_c</math> (about 0.6 for the Dutch coast) and onshore migration when <math>\Gamma</math> is smaller than 0.3.
 +
 
 +
When wave heights increase after a long period of lower waves, the corresponding increase of the ratio <math>\Gamma</math> will be offset by an offshore shift of the sandbar location to deeper water. Conversely, decreasing wave heights will shift the bar location onshore to shallower water. Sandbar migration in the non‐ to slightly‐breaking regime is always directed onshore, which eventually gives rise to a beach state without submerged sandbars. The existence of this feedback mechanism that forces nearshore bars to an equilibrium location depending on wave forcing is supported by observational evidence<ref name=PFH>Plant, N.G., Freilich, M.H. and Holman, R.A. 2001. Role of morphodynamic feedback in surf zone sandbar response. J. Geophys. Re. 106: 973-989</ref>. However, because the response time of cross‐shore bar motion is generally longer than the timescale of variability in the wave climate, sandbars hardly ever reach their equilibrium location. As such, sandbars spend most of their lifetime out‐of‐equilibrium with the wave forcing<ref>Pape, L., Plant, N.G. and Ruessink, B.G. 2010. On cross-shore migration and equilibrium states of nearshore sandbars. J. Geophys. Res. 115, F03008</ref>. In situations where the bar has moved offshore to deeper water under energetic wave conditions, a subsequent period of low waves may not result in shoreward return of the bar, due to the absence of breaking wave conditions at this offshore location. In this case, the offshore bar will decay.
 +
 
 +
During storm periods, large offshore bar displacements can occur in a short time. Landward bar migration is much slower; long periods of onshore motion are required to offset the seaward migration of a single high-wave period<ref> Wijnberg, K.M. and Kroon, A. 2002. Barred beaches. Geomorphology 48: 103–120</ref>. Most observations indicate a long-term net offshore migration<ref name=A17>Aleman, N., Certain, R., Robin, N. and Barusseau, J-P. 2017. Morphodynamics of slightly oblique nearshore bars and their relationship with the cycle of net offshore migration. Marine Geology 392: 41–52</ref>. However, there are also coasts where nearshore bars migrate in a landward direction<ref name=A4>Aagaard, T., Davidson-Arnott, R., Greenwood, B. and Nielsen, J. 2004. Sediment supply from shoreface to dunes: linking sediment transport measurements and long-term morphological evolution. Geomorphology 60: 205–224</ref> (Fig. 5). This seems to be a feature of highly dissipative coasts, i.e., coasts with a fine-sandy gently sloping shoreface, where waves are breaking gradually without developing strong undertow currents<ref name=A13>Aagaard, T., Greenwood, B. and Hughes, M. 2013. Sand transport on dissipative, intermediate and reflective beaches. Earth Sci. Rev. 124: 32–50</ref>. Onshore bar migration generally occurs during long periods of swell-dominated conditions. In some cases the bar eventually welds to the shoreline, leaving a non-barred shoreface<ref> Shepard, F.P. 1950. Beach cycles in southern California. In: Beach Erosion Board (Technical Memo 20). US Army Corps of Engineering, Washington DC.</ref>. The process of onshore bar migration is often associated with the formation of bar-rip systems with a longshore rhythmic variation. This is described more in detail in the article [[Rhythmic shoreline features]], where it is shown that longshore sand transport processes also play an important role in the generation and evolution of nearshore sandbars.
 +
 
 +
In situations where the net bar migration is directed offshore, the bar eventually decays when the water depth above the crest becomes too large to induce frequent wave breaking and associated convergence of sand transport<ref>Birkemeier, W.A. 1984. Time scales of nearshore profile changes. In: 19th International Conference on Coastal Engineering. American Society of Civil Engineers, New York, pp. 1507-1521</ref><ref>Ruessink, B.G. and Kroon, A. 1994. The behaviour of a multiple bar system in the nearshore zone of Terschelling, The Netherlands. Marine Geology 121: 187–197</ref>. When this outer bar decays, energetic incident waves reach more easily the intertidal beach and are capable of removing sand for the generation of a new bar that subsequently starts moving offshore. However, at some coasts, observations show the generation of an outer bar offshore at the location where energetic incident waves start breaking on the shoreface<ref name=PFH>Plant, N.G., Freilich, M.H. and Holman, R.A. 2001. Role of morphodynamic feedback in surf zone sandbar response. J. Geophys. Re. 106: 973-989</ref><ref name=A4/>.  
 +
 
 +
Offshore sandbar migration implies accretion at the outer (seaward) bar flank and erosion of the inner side. This does not necessarily proceed through sand transfer from the inner to the outer bar flank; the outer bar flank can accrete with sand imported from offshore. Offshore sandbar migration is thus not synonymous with sand loss to deeper water.  
  
  
 
==Multiple bar system==
 
==Multiple bar system==
Dissipative coasts with a wide surf zone usually have several (often 3 or 4) more or less parallel bars. The dynamics of multiple bar systems are not fully understood, although some qualitative features are reproduced by semi-empirical models<ref>Splinter, K.D., Gonzalez, M.V.G., Oltman-Shay, J., Rutten, J. and Holman, R. 2018. Observations and modelling of shoreline and multiple sandbar behaviour on a high-energy meso-tidal beach. Continental Shelf Research 159: 33-45</ref>. It has been suggested that Bragg scattering – the resonant reflection of low-frequent waves (infragravity waves) in a multiple bar system – plays a role in their formation<ref>Elgar, S., Raubenheimer, B. and Herbers, T.H.C. 2003. Bragg reflection of ocean waves from sandbars. Geophysical Research Letters 30, 1016, doi:10.1029/2002GL016351, 2003</ref>. Multiple bars can also arise from sand bank splitting, which has been observed during low-energy conditions, several weeks after the incidence of high-energy waves<ref>Vidal-Ruiz, J.A. and Ruiz de Alegria-Arzaburu, A. 2020. Modes of onshore sandbar migration at a single-barred and swell-dominated beach. Marine Geology 426, 106222</ref>. Another particularity of many nearshore bar systems is the orientation with respect to the shoreline. In many cases the bars make a small angle of 2-4 degrees, their distal end at the outer edge of the nearshore region pointing in the direction of the littoral drift<ref name=A17/>. When the distal part decays offshore, the most inner part separates from the shoreline and starts moving offshore.  More generally, the behaviour and alongshore variability of inner bars and the shoreline is influenced by wave breaking patterns on the outer bars<ref>Ruessink, B.G., Pape, L. and Turner, I.L. 2009. Daily to interannual cross-shore sandbar migration: observations from a multiple sandbar system. Cont. Shelf Res. 29: 1663–1677</ref> and by the tide range<ref>Almar, R., Castelle, B., Ruessink, B.G., Senechal, N., Bonneton, P. and Marieu, V. 2010. Two- and three-dimensional double-sandbar system behaviour under intense wave forcing and a meso-macro tidal range. Cont. Shelf Res. 30: 781–792</ref>.
+
 
 +
[[File:ShorefaceBathymetryKatwijk.jpg|thumb|right|400px|<small>Fig. 6. Bathymetry of the shoreface at the Dutch coast (Katwijk, 11 August 1998) displaying 3 nearshore sandbars. The outer bar is fading. Image credit E.J. Biegel. </small>]] 
 +
 
 +
Dissipative coasts with a wide surf zone usually have several (often 3 or 4) more or less parallel bars. The shoreface bathymetry of the Dutch coast at Katwijk is shown as an example in Fig. 6. When energetic waves break at a location relatively far offshore, waves can re-form after breaking and break a second time or even a third or fourth time before collapsing on the beach. These multiple breakpoints may give rise to a multiple bar system. Rozynski and Lin (2015<ref>Rozynski, G. and Lin, J-G. 2015. Data-Driven and Theoretical Beach Equilibrium Profiles: Implications and Consequences. Journal of Waterway, Port, Coastal and Ocean Engineering 141(5): 04015002</ref>) described the nearshore bar system at the micro-tidal Baltic coast of Poland as follows:
 +
(1) when waves are mild, the surf zone is narrow, and they break only over the innermost bar; (2) higher waves begin to break over the second bar, the surf zone now includes two bars, and the breakers can include spilling or plunging modes or both; (3) during heavy storms, the outer bars contribute to wave-energy dissipation as well – the surf zone now includes four or more bars and is several hundred meters wide; various combinations of spilling and plunging modes are then possible, resulting in very complicated alongshore and cross-shore driven sediment patterns; (4) variations in wave set-up and wind-driven storm surges (in a range of 1 m) further modify the breaking regimes during the build-up, peak and recession of storms.
 +
 
 +
The dynamics of multiple bar systems is not fully understood, although some qualitative features are reproduced by semi-empirical models<ref>Splinter, K.D., Gonzalez, M.V.G., Oltman-Shay, J., Rutten, J. and Holman, R. 2018. Observations and modelling of shoreline and multiple sandbar behaviour on a high-energy meso-tidal beach. Continental Shelf Research 159: 33-45</ref>. It has been suggested that Bragg scattering – the resonant reflection of low-frequent waves (infragravity waves) in a multiple bar system – plays a role in their formation<ref>Elgar, S., Raubenheimer, B. and Herbers, T.H.C. 2003. Bragg reflection of ocean waves from sandbars. Geophysical Research Letters 30, 1016, doi:10.1029/2002GL016351, 2003</ref>. Multiple bars can arise from various other mechanisms, such as sand bar splitting (which has been observed during low-energy conditions, several weeks after the incidence of high-energy waves<ref>Vidal-Ruiz, J.A. and Ruiz de Alegria-Arzaburu, A. 2020. Modes of onshore sandbar migration at a single-barred and swell-dominated beach. Marine Geology 426, 106222</ref>) and distinct wave breakpoints at high water and low water on the shoreface of tidal coasts. There is only limited sand exchange between multiple bars because of small sand transport capacity in the troughs between the bars<ref name=A13/>.  
 +
 
 +
An often-observed particularity of many nearshore bar systems is the orientation with respect to the shoreline. In many cases the bars make a small angle of 2-4 degrees, their distal end at the outer edge of the nearshore region pointing in the direction of the littoral drift<ref name=A17/>. When the distal part decays offshore, the most inner part separates from the shoreline and starts moving offshore.  More generally, the behaviour and alongshore variability of inner bars and the shoreline is influenced by wave breaking patterns on the outer bars<ref>Ruessink, B.G., Pape, L. and Turner, I.L. 2009. Daily to interannual cross-shore sandbar migration: observations from a multiple sandbar system. Cont. Shelf Res. 29: 1663–1677</ref> and by the tide range<ref>Almar, R., Castelle, B., Ruessink, B.G., Senechal, N., Bonneton, P. and Marieu, V. 2010. Two- and three-dimensional double-sandbar system behaviour under intense wave forcing and a meso-macro tidal range. Cont. Shelf Res. 30: 781–792</ref>.
 +
 
 +
While multiple bar systems are typical for wide dissipative high-energy beaches, there are situations where nearshore bars are absent from such beaches. For example, no bars were present in the nearshore zone of the coastal stretch between The Hague and Rotterdam (Netherlands). The groyne field along this coastal stretch was suggested as a possible reason, because a nearshore bar developed spontaneously after the groyne field was covered by a beach nourishment<ref>Radermacher, M., de Schipper, M.A., Price, T.D., Huisman, B.J.A., Aarninkhof, S.G.J. and Reniers, A.J.H.M. 2018. Behaviour of subtidal sandbars in response to nourishments. Geomorphology 313: 1–12</ref>. 
  
  
Line 37: Line 66:
 
:[[Closure depth]]
 
:[[Closure depth]]
 
:[[Rhythmic shoreline features]]
 
:[[Rhythmic shoreline features]]
 
+
:[[Rip current]]
  
  

Revision as of 14:54, 24 April 2023

It is recommended to read this article in conjunction with the article Shoreface profile.


Introduction

Fig. 1. Wave transformation in the nearshore zone.


Nearshore sandbars, also called breaker bars, are a common feature of the surf zone of sandy coasts subject to energetic wave action. Their occurrence is related to the shoreface slope, which should be smaller than about 1/30[1]. They are the result of the dynamic interaction between the shape of the coastal profile and the transformation of waves as they propagate onshore; at the same time, they are an important agent in this interaction[2]. Their presence promotes the breaking of waves further away from the shoreline; they thus reduce the wave forces exerted directly on the shore[3]. The cartoon of Fig. 1 shows a typical example of the transformation and breaking of incident waves in the nearshore zone.

Under high-energy wave conditions, nearshore sandbars tend to be straight, with a parallel orientation to the coast, or at a small angle to the shoreline. Sandbars close to the shore can break up into smaller sandbars with crescentic shapes under less energetic wave conditions. This usually occurs in conjunction with the development of a rip cell system, as described in the articles Rip current and Rhythmic shoreline features.

Bar formation

Fig. 2. Profiles (green and blue) schematically representing two successive stages of bar formation by wave breaking on an initially non-barred shoreface (red). Adapted after [4].

Understanding sandbar dynamics has greatly progressed thanks to the development of the Argus video monitoring system, which allows continuous observation of the presence and migration of sandbars under a wide variety of conditions. Nevertheless, the behavior of sandbars is not yet fully understood and subject of ongoing research. Laboratory experiments[5][6][7] and process-based morphodynamic modeling[8][9][10] show that nearshore sandbars can develop as a result of wave breaking on a non-barred shoreface. Onshore sand transport by incident waves is prevalent before breaking and offshore transport after breaking. Thus, an initial bar is formed by breaker-induced convergence of sediment transport just seaward of the breakpoint and an associated trough at the initial breakpoint. The initial bar will force the breakpoint further down the shoreface and the initial bar will follow until reaching a position where the breaker-induced offshore sand transport is weakened and in equilibrium with wave-induced onshore transport (Fig. 2). This mechanism illustrates that gently sloping shorefaces subject to vigorous wave breaking will usually exhibit a barred profile. Field and laboratory observations show that in the bar crest region the sediment grain size is greater than in the shoreward trough[11]. In the case of a stationary wave climate, the processes that initiate bar formation also contribute to bar growth. Over time, however, they are gradually overruled by other processes that limit bar growth, such as gravity-induced sediment transport down the bar slopes[11]. In situations of less intense wave breaking the bar will not grow high but take the form of a terrace[12][13].

Underlying processes

A variety of physical processes are involved in bar formation. The nonlinear interaction of the shoaling wave with the seabed prior to breaking generates higher velocities and stronger acceleration of onshore wave orbital motion compared to offshore wave orbital motion (so-called 'skewness' of wave orbital velocity and acceleration)[14]. The onshore wave orbital motion strongly accelerates when the wave boundary layer is still thin and so creates a strong bed shear stress that entrains seabed particles[15]. Seabed particles can also be set in onshore motion by the pressure gradient under the steep wave front[16]. These various processes generate net onshore bedload transport in the wave boundary layer[17] (Fig. 3). The skewness of the wave orbital velocity and acceleration is reduced after wave breaking and therefore contributes less to onshore sediment transport in the surf zone on the shoreward side of the breakpoint. Offshore sediment transport on the shoreward side of the breakpoint is mainly due to the undertow current (the net return flow in the water column compensating for the onshore mass transport in the upper part of the water column between wave trough and crest). The undertow induces strong offshore transport as it is loaded with sediment lifted from the seabed by the turbulence produced by wave breaking, especially for plunging breakers[18][19][20]. Seabed stirring and sediment resuspension landward of the breakpoint can be further enhanced by longshore currents induced by obliquely incident breaking waves[21]. The wave orbital motion also contributes to seaward transport as the highest sediment resuspension occurs during flow reversal from wave trough to wave crest[11]. Under energetic waves, suspended load transport dominates over bedload transport in the wave breaking zone and in the surf zone, whereas bedload transport dominates in the wave shoaling zone (Fig. 4).


Fig. 3. Onshore-offshore asymmetry of the wave orbital velocity and acceleration in the shoaling zone. The acceleration of offshore to onshore wave orbital velocities is substantially larger than the acceleration in the opposite direction (sometimes called positive acceleration skewness or asymmetry). The maximum onshore orbital velocity in the wave crest phase is also substantially larger than the maximum offshore orbital velocity in the wave trough phase (sometimes called positive velocity skewness). In most cases this will induce net onshore sand transport, although in some cases the opposite may also happen (see Sediment transport formulas for the coastal environment).
Fig. 4. Schematic of the major bar-building sediment transport processes. Adapted after [4].

Bar migration

Fig. 5. Cross-shore depth profiles of the surf zone at Skallingen [22] (Denmark) and Egmond [23] (Netherlands) showing systems of multiple nearshore bars at different years. For both, 0 m depth corresponds approximately to mean sea level. At Skallingen the bar crests move in onshore direction, whereas at Egmond the bar crests move in offshore direction. At Egmond, the outer bar decays at the seaward limit of the surf zone at 8 m depth. Both coasts are storm-dominated. Symbols: median grain size [math]\small d_{50}[/math] [mm], mean significant wave height [math]\small H_s[/math] [m], mean wave period [math]\small T[/math] [s], tidal range [math]\small TR[/math] [m].

Nearshore sandbars are not static features but move in onshore or offshore direction depending on the wave climate. Ruessink and Terwindt, 2000[24]) found that on the Dutch coast bars migrate offshore under energetic waves (storm periods), while under mild waves (long-period waves, swell, non-breaking onshore propagating surf bores) the migration direction is onshore. This study also showed that offshore migration dominates when [math]\Gamma \equiv (H_s/h)_{crest}[/math] (ratio of significant wave height [math]H_s[/math] to water-depth-above-barcrest [math]h[/math]) is larger than a critical value [math]\Gamma_c[/math] (about 0.6 for the Dutch coast) and onshore migration when [math]\Gamma[/math] is smaller than 0.3.

When wave heights increase after a long period of lower waves, the corresponding increase of the ratio [math]\Gamma[/math] will be offset by an offshore shift of the sandbar location to deeper water. Conversely, decreasing wave heights will shift the bar location onshore to shallower water. Sandbar migration in the non‐ to slightly‐breaking regime is always directed onshore, which eventually gives rise to a beach state without submerged sandbars. The existence of this feedback mechanism that forces nearshore bars to an equilibrium location depending on wave forcing is supported by observational evidence[25]. However, because the response time of cross‐shore bar motion is generally longer than the timescale of variability in the wave climate, sandbars hardly ever reach their equilibrium location. As such, sandbars spend most of their lifetime out‐of‐equilibrium with the wave forcing[26]. In situations where the bar has moved offshore to deeper water under energetic wave conditions, a subsequent period of low waves may not result in shoreward return of the bar, due to the absence of breaking wave conditions at this offshore location. In this case, the offshore bar will decay.

During storm periods, large offshore bar displacements can occur in a short time. Landward bar migration is much slower; long periods of onshore motion are required to offset the seaward migration of a single high-wave period[27]. Most observations indicate a long-term net offshore migration[28]. However, there are also coasts where nearshore bars migrate in a landward direction[22] (Fig. 5). This seems to be a feature of highly dissipative coasts, i.e., coasts with a fine-sandy gently sloping shoreface, where waves are breaking gradually without developing strong undertow currents[29]. Onshore bar migration generally occurs during long periods of swell-dominated conditions. In some cases the bar eventually welds to the shoreline, leaving a non-barred shoreface[30]. The process of onshore bar migration is often associated with the formation of bar-rip systems with a longshore rhythmic variation. This is described more in detail in the article Rhythmic shoreline features, where it is shown that longshore sand transport processes also play an important role in the generation and evolution of nearshore sandbars.

In situations where the net bar migration is directed offshore, the bar eventually decays when the water depth above the crest becomes too large to induce frequent wave breaking and associated convergence of sand transport[31][32]. When this outer bar decays, energetic incident waves reach more easily the intertidal beach and are capable of removing sand for the generation of a new bar that subsequently starts moving offshore. However, at some coasts, observations show the generation of an outer bar offshore at the location where energetic incident waves start breaking on the shoreface[25][22].

Offshore sandbar migration implies accretion at the outer (seaward) bar flank and erosion of the inner side. This does not necessarily proceed through sand transfer from the inner to the outer bar flank; the outer bar flank can accrete with sand imported from offshore. Offshore sandbar migration is thus not synonymous with sand loss to deeper water.


Multiple bar system

Fig. 6. Bathymetry of the shoreface at the Dutch coast (Katwijk, 11 August 1998) displaying 3 nearshore sandbars. The outer bar is fading. Image credit E.J. Biegel.

Dissipative coasts with a wide surf zone usually have several (often 3 or 4) more or less parallel bars. The shoreface bathymetry of the Dutch coast at Katwijk is shown as an example in Fig. 6. When energetic waves break at a location relatively far offshore, waves can re-form after breaking and break a second time or even a third or fourth time before collapsing on the beach. These multiple breakpoints may give rise to a multiple bar system. Rozynski and Lin (2015[33]) described the nearshore bar system at the micro-tidal Baltic coast of Poland as follows: (1) when waves are mild, the surf zone is narrow, and they break only over the innermost bar; (2) higher waves begin to break over the second bar, the surf zone now includes two bars, and the breakers can include spilling or plunging modes or both; (3) during heavy storms, the outer bars contribute to wave-energy dissipation as well – the surf zone now includes four or more bars and is several hundred meters wide; various combinations of spilling and plunging modes are then possible, resulting in very complicated alongshore and cross-shore driven sediment patterns; (4) variations in wave set-up and wind-driven storm surges (in a range of 1 m) further modify the breaking regimes during the build-up, peak and recession of storms.

The dynamics of multiple bar systems is not fully understood, although some qualitative features are reproduced by semi-empirical models[34]. It has been suggested that Bragg scattering – the resonant reflection of low-frequent waves (infragravity waves) in a multiple bar system – plays a role in their formation[35]. Multiple bars can arise from various other mechanisms, such as sand bar splitting (which has been observed during low-energy conditions, several weeks after the incidence of high-energy waves[36]) and distinct wave breakpoints at high water and low water on the shoreface of tidal coasts. There is only limited sand exchange between multiple bars because of small sand transport capacity in the troughs between the bars[29].

An often-observed particularity of many nearshore bar systems is the orientation with respect to the shoreline. In many cases the bars make a small angle of 2-4 degrees, their distal end at the outer edge of the nearshore region pointing in the direction of the littoral drift[28]. When the distal part decays offshore, the most inner part separates from the shoreline and starts moving offshore. More generally, the behaviour and alongshore variability of inner bars and the shoreline is influenced by wave breaking patterns on the outer bars[37] and by the tide range[38].

While multiple bar systems are typical for wide dissipative high-energy beaches, there are situations where nearshore bars are absent from such beaches. For example, no bars were present in the nearshore zone of the coastal stretch between The Hague and Rotterdam (Netherlands). The groyne field along this coastal stretch was suggested as a possible reason, because a nearshore bar developed spontaneously after the groyne field was covered by a beach nourishment[39].


Related articles

Shoreface profile
Parametric equilibrium models
Closure depth
Rhythmic shoreline features
Rip current


References

  1. Davidson-Arnott, R. 2022. Nearshore Bars. Treatise on Geomorphology, 2nd edition, Volume 8, Ch. 10. Elsevier
  2. Wright, L.D. and Short, A.D. 1984. Morphodynamic variability of surf zones and beaches – a synthesis. Mar. Geol. 56: 93–118
  3. Quartel, S., Kroon, A. and Ruessink, B.G. 2008. Seasonal accretion and erosion patterns of a microtidal sandy beach. Mar. Geol. 250: 19–33
  4. 4.0 4.1 García-Maribona, J., Lara, J.L., Maza, M. and Losada, I.J. 2022. Analysis of the mechanics of breaker bar generation in cross-shore beach profiles based on numerical modelling. Coastal Engineering 177, 104172
  5. Roelvink, D. and Stive, M.J.F., 1989. Bar-generating cross-shore flow mechanisms on a beach. J. of Geophys. Res. Oceans 94: 4785–4800
  6. Baldock, T.E., Alsina, J.A., Caceres, I., Vicinanza, D., Contestabile, P., Power, H. and Sanchez-Arcilla, A. 2011. Large-scale experiments on beach profile evolution and surf and swash zone sediment transport induced by long waves, wave groups and random waves. Coast. Eng. 58: 214–2
  7. Eichentopf, S., Van der Zanden, J., Cacere, I. and Alsina, J.M. 2019. Beach profile evolution towards equilibrium from varying initial morphologies. J. Mar. Sci. Eng. 7: 406
  8. Dally, W.R. and Dean, R.G. 1984. Suspended sediment transport and beach profile evolution. J. Waterw. Port Coast. Ocean Eng. ASCE 110: 15–33
  9. Jacobsen, N.G., Fredsoe, J. and Jensen, J.H. 2014. Formation and development of a breaker bar under regular waves. Part 1: Model description and hydrodynamics. Coastal Eng. 88: 182-193
  10. Li, Y., Zhang, C., Chen, D., Zheng, J., SunJ. and Wang, P. 2021. Barred beach profile equilibrium investigated with a process-based numerical model. Continental Shelf Research 222: 104432
  11. 11.0 11.1 11.2 van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017. Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92 Cite error: Invalid <ref> tag; name "ZA" defined multiple times with different content
  12. Wright, L. D., Short, A. D. and Green, M. O. 1985. Short-term changes in the morphodynamic states of beaches and surf zones: An empirical predictive model Mar. Geol. 62: 339–364
  13. Scott, T., Masselink, G. and Russell, P. 2011. Morphodynamic characteristics and classification of beaches in England and Wales. Marine Geology 286: 1–20
  14. Elgar, S., Gallagher, E.L. and Guza, R.T. 2001. Nearshore sandbar migration. J. Geophys. Res. 106 (C6), 11623
  15. Nielsen, P., 1992. Coastal Bottom Boundary Layers and Sediment Transport. World Scientific, Singapore
  16. Foster, D. L., Bowen, A.J., Holman, R.A. and Natoo, P. 2006. Field evidence of pressure gradient induced incipient motion. J. Geophys. Res. 111: C05004
  17. van der Zanden, J., van der A, D.A., Hurther, D., Caceres, I., O'Donoghue, T., Hulscher, S.J.M.H. and Ribberink, J.S. 2017. Bedload and suspended load contributions to breaker bar morphodynamics. Coastal Engineering 129: 74–92
  18. Zhang, D.P. and Sunamura, T. 1994. Multiple bar formation by breaker-induced vortices: a laboratory approach. In: Proc. Intern. Conf. Coast. Eng., pp. 2856–2870
  19. Thornton, E. B., Humiston, R. T. and Birkemeier, W. 1996. Bar/trough generation on a natural beach. J. Geophys. Res. 101: 12,097–12,110
  20. Gallagher, E.L., Elgar, S.and Guza, R.T. 1998. Observations of sand bar evolution on a natural beach. J. Geophys. Res.: Oceans 103 (C2): 3203–3215
  21. Walstra, D. J. R., Reniers, A. J. H. M., Ranasinghe, R., Roelvink, J. A. and Ruessink, B. G. 2012. On bar growth and decay during interannual net offshore migration. Coastal Eng. 60: 190–200
  22. 22.0 22.1 22.2 Aagaard, T., Davidson-Arnott, R., Greenwood, B. and Nielsen, J. 2004. Sediment supply from shoreface to dunes: linking sediment transport measurements and long-term morphological evolution. Geomorphology 60: 205–224
  23. Van Rijn, L.C., Ruessink, B.G. and Mulder, J.P.M. 2002. Summary of project results. In: Coast3D-Egmond, The behaviour of a straight sandy coast on the time scale of storms and seasons. ISBN 90-800356-5-3-, Aqua Publ. Amsterdam
  24. Ruessink, B.G. and Terwindt, J.H.J. 2000. The behaviour of nearshore bars on the time scale of years: A conceptual model. Mar. Geol. 163: 289–302
  25. 25.0 25.1 Plant, N.G., Freilich, M.H. and Holman, R.A. 2001. Role of morphodynamic feedback in surf zone sandbar response. J. Geophys. Re. 106: 973-989
  26. Pape, L., Plant, N.G. and Ruessink, B.G. 2010. On cross-shore migration and equilibrium states of nearshore sandbars. J. Geophys. Res. 115, F03008
  27. Wijnberg, K.M. and Kroon, A. 2002. Barred beaches. Geomorphology 48: 103–120
  28. 28.0 28.1 Aleman, N., Certain, R., Robin, N. and Barusseau, J-P. 2017. Morphodynamics of slightly oblique nearshore bars and their relationship with the cycle of net offshore migration. Marine Geology 392: 41–52
  29. 29.0 29.1 Aagaard, T., Greenwood, B. and Hughes, M. 2013. Sand transport on dissipative, intermediate and reflective beaches. Earth Sci. Rev. 124: 32–50
  30. Shepard, F.P. 1950. Beach cycles in southern California. In: Beach Erosion Board (Technical Memo 20). US Army Corps of Engineering, Washington DC.
  31. Birkemeier, W.A. 1984. Time scales of nearshore profile changes. In: 19th International Conference on Coastal Engineering. American Society of Civil Engineers, New York, pp. 1507-1521
  32. Ruessink, B.G. and Kroon, A. 1994. The behaviour of a multiple bar system in the nearshore zone of Terschelling, The Netherlands. Marine Geology 121: 187–197
  33. Rozynski, G. and Lin, J-G. 2015. Data-Driven and Theoretical Beach Equilibrium Profiles: Implications and Consequences. Journal of Waterway, Port, Coastal and Ocean Engineering 141(5): 04015002
  34. Splinter, K.D., Gonzalez, M.V.G., Oltman-Shay, J., Rutten, J. and Holman, R. 2018. Observations and modelling of shoreline and multiple sandbar behaviour on a high-energy meso-tidal beach. Continental Shelf Research 159: 33-45
  35. Elgar, S., Raubenheimer, B. and Herbers, T.H.C. 2003. Bragg reflection of ocean waves from sandbars. Geophysical Research Letters 30, 1016, doi:10.1029/2002GL016351, 2003
  36. Vidal-Ruiz, J.A. and Ruiz de Alegria-Arzaburu, A. 2020. Modes of onshore sandbar migration at a single-barred and swell-dominated beach. Marine Geology 426, 106222
  37. Ruessink, B.G., Pape, L. and Turner, I.L. 2009. Daily to interannual cross-shore sandbar migration: observations from a multiple sandbar system. Cont. Shelf Res. 29: 1663–1677
  38. Almar, R., Castelle, B., Ruessink, B.G., Senechal, N., Bonneton, P. and Marieu, V. 2010. Two- and three-dimensional double-sandbar system behaviour under intense wave forcing and a meso-macro tidal range. Cont. Shelf Res. 30: 781–792
  39. Radermacher, M., de Schipper, M.A., Price, T.D., Huisman, B.J.A., Aarninkhof, S.G.J. and Reniers, A.J.H.M. 2018. Behaviour of subtidal sandbars in response to nourishments. Geomorphology 313: 1–12



The main author of this article is Job Dronkers
Please note that others may also have edited the contents of this article.

Citation: Job Dronkers (2023): Nearshore sandbars. Available from http://www.coastalwiki.org/wiki/Nearshore_sandbars [accessed on 28-03-2024]