Difference between revisions of "Biogeomorphology of coastal systems"
Dronkers J (talk | contribs) |
Dronkers J (talk | contribs) |
||
(6 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | This article considers the '''biogeomorphology of aquatic systems'''. The biogeomorpholgy of both hard and soft substratum including the role in which plants and animals play in stabilizing and de-stabilizing these aquatic systems is also explored. | + | This article considers the '''biogeomorphology of coastal aquatic systems'''. The biogeomorpholgy of both hard and soft substratum including the role in which plants and animals play in stabilizing and de-stabilizing these aquatic systems is also explored. |
==Introduction== | ==Introduction== | ||
Line 8: | Line 8: | ||
==Essential concepts== | ==Essential concepts== | ||
− | The term '''[[biogeomorphology]]''' was first used in the eighties (Viles, 1988 | + | The term '''[[biogeomorphology]]''' was first used in the eighties (Viles, 1988<ref name="Viles"> Viles H.A. (ed.) 1988. Biogeomorphology. Oxford: Basil Blackwell Ltd.</ref>), although earlier studies focused on the topic without using this term. In coastal systems biogeomorphological interactions are clearly demonstrated in shallow, productive waters and various sedimentary environments. Examples of biogeomorphological interrelationships include sand dune development, tidal flats, [[salt marsh|salt marshes]], [[mangrove]] systems and coral reefs. |
− | Relevant geomorphological factors in coastal systems are '''[[bathymetry]], bed composition''' (rock, gravel, sand, silt), and the '''transport of sediment'''. It also includes factors that drive | + | Relevant geomorphological factors in coastal systems are '''[[bathymetry]], bed composition''' (rock, gravel, sand, silt), and the '''transport of sediment'''. It also includes factors that drive '''morphological processes''', such as water flow and wave energy. The biota involved in coastal [[biogeomorphology]]<ref name="Baptist"> Baptist M.J. 2005. Biogeomorphology. In: Schwartz, M. (Ed.). Encyclopaedia of Coastal Science, pp. 192-193. ISBN 1-4020-1903-3</ref> include '''plants''' and '''animals''', ranging from very small (microorganisms) to very large (feeding pits of whales). |
The geomorphological directly affects biota through its influence on '''habitats'''. Coastal morphology and geomorphological processes define the gradients between high and low, between wet and dry and between sedimentation and [[erosion]]. These gradients and the processes that cause them determine the gradients in grain size, nutrient levels, organic matter levels and water content. Plants and animals are adapted to specific conditions and will therefore be found and abundant at specific locations (often forming habitats). | The geomorphological directly affects biota through its influence on '''habitats'''. Coastal morphology and geomorphological processes define the gradients between high and low, between wet and dry and between sedimentation and [[erosion]]. These gradients and the processes that cause them determine the gradients in grain size, nutrient levels, organic matter levels and water content. Plants and animals are adapted to specific conditions and will therefore be found and abundant at specific locations (often forming habitats). | ||
Line 18: | Line 18: | ||
In some cases morphological processes are dominant over biological processes and therefore it is necessary for biota to adjust to their environment. In other cases biological processes are dominant (e.g. coral reefs, [[salt marsh]]es). The most interesting are those cases where there is a mutual interaction that leads to feedback '''coupling of processes'''. When looking for these cases, it is important to examine the [[Spatial and temporal scales in biogeomorphology|spatial and temporal scales]] of the mutually interacting processes. | In some cases morphological processes are dominant over biological processes and therefore it is necessary for biota to adjust to their environment. In other cases biological processes are dominant (e.g. coral reefs, [[salt marsh]]es). The most interesting are those cases where there is a mutual interaction that leads to feedback '''coupling of processes'''. When looking for these cases, it is important to examine the [[Spatial and temporal scales in biogeomorphology|spatial and temporal scales]] of the mutually interacting processes. | ||
− | [[Image:waddenseamokbaai.jpg|thumb|350px| Fig. 1 Worm casts produced by Arenicola marina on sandy / muddy beach increase bed roughness and sediment resuspension]] | + | [[Image:waddenseamokbaai.jpg|thumb|350px| Fig. 1 Worm casts produced by Arenicola marina on sandy / muddy beach increase bed roughness and sediment resuspension.]] |
===Biogeomorphology for hard substrates=== | ===Biogeomorphology for hard substrates=== | ||
Line 25: | Line 25: | ||
===Biogeomorphology for soft substrates=== | ===Biogeomorphology for soft substrates=== | ||
In soft coastal systems, the interrelationships between geomorphological factors and biota mainly apply to [[benthic]] fauna and flora. The presence of [[benthic]] species is affected by hydraulic and morphologic conditions, such as water depth or elevation on the shore, current velocity, wave action, salinity and grain size. The biota responsible for changes in geomorphology of soft substrates can be divided into two functional groups, namely '''biostabilizers''' and '''biodestabilizers'''. [[Biostabilization]] leads to increased sediment stability and a reduction in [[erosion]] potential, whereas [[biodestabilization]] leads to reduced sediment stability and an increase in erodibility. | In soft coastal systems, the interrelationships between geomorphological factors and biota mainly apply to [[benthic]] fauna and flora. The presence of [[benthic]] species is affected by hydraulic and morphologic conditions, such as water depth or elevation on the shore, current velocity, wave action, salinity and grain size. The biota responsible for changes in geomorphology of soft substrates can be divided into two functional groups, namely '''biostabilizers''' and '''biodestabilizers'''. [[Biostabilization]] leads to increased sediment stability and a reduction in [[erosion]] potential, whereas [[biodestabilization]] leads to reduced sediment stability and an increase in erodibility. | ||
+ | <br clear=all> | ||
====Biostabilization by plants==== | ====Biostabilization by plants==== | ||
+ | [[Image:seagrasswaddensea.jpg|thumb|250px|Fig. 2 Seagrass meadow.]] | ||
+ | |||
On tidal flats, '''small algae''' (diatoms) are capable of affecting the geomorphology. These diatoms can form extensive algal mats and excrete extracellular polymeric substances, which is a sticky mucus-like substance made of polysaccharides that glues the sediment together and therefore protects the sediment against [[erosion]]. | On tidal flats, '''small algae''' (diatoms) are capable of affecting the geomorphology. These diatoms can form extensive algal mats and excrete extracellular polymeric substances, which is a sticky mucus-like substance made of polysaccharides that glues the sediment together and therefore protects the sediment against [[erosion]]. | ||
− | + | ||
− | '''Seaweeds''' and '''[[salt marsh]]''' plants are capable of modifying their physical environments by damping down wave energy and tidal currents. [[Salt marsh]] vegetation can also promote sediment deposition resulting in a gradual elevation of the marsh on the upper shore. The higher the marsh gets, the more vegetation can grow and the better the protection against [[erosion]]. Other stabilizing effects result from cementation of beach-rock by cyanobacteria and stromatolite formation by algae. | + | [[Seagrass]] is dependent on clear water, it needs sunlight to grow. A [[seagrass]] meadow (Fig. 2) slows down the current velocity near the bed, therefore reducing the resuspension of sand and silt, and this in turn helps to maintain clear water. Their root system also promotes binding of the substrate. In addition, [[seagrass]] meadows encourage deposition of suspended sediment, which leads to the supply of organic material and nutrients needed for growth. |
+ | '''Seaweeds''' and '''[[salt marsh]]''' plants are capable of modifying their physical environments by damping down wave energy and tidal currents. [[Salt marsh]] vegetation can also promote sediment deposition resulting in a gradual elevation of the marsh on the upper shore. The higher the marsh gets, the more vegetation can grow and the better the protection against [[erosion]]. Other stabilizing effects result from cementation of beach-rock by cyanobacteria and stromatolite formation by algae. Research of Temmerman et al. (2005<ref name="Temmerman et al. 2005"> Temmerman, S., Bouma, T. J., Govers, G., Wang, Z. B., De Vries, M. B. and Herman P. M. J. 2005. Impact of vegetation on flow routing and sedimentation patterns: Three-dimensional modeling for a tidal marsh. J. Geophys. Res. 110, F04019.</ref>, 2007<ref name="Temmerman et al. 2007">Temmerman, S., Bouma, T.J., Van de Koppel, J., Van der Wal, D., De Vries, M.B. and Herman, P.M.J. 2007. Vegetation causes channel erosion in a tidal landscape. Geology 7: 631-634</ref>) points out that the interaction of vegetation growth, tides and sedimentation is crucial in the formation of the typical levee-basin configuration of the saltmarsh landscape. | ||
+ | |||
[[Image:biogeomorphology.jpg|thumb|centre|700px| Fig. 3 Upper shore salt marsh with creek system and evidence of benthic diatoms stabilizing mudbanks.]] | [[Image:biogeomorphology.jpg|thumb|centre|700px| Fig. 3 Upper shore salt marsh with creek system and evidence of benthic diatoms stabilizing mudbanks.]] | ||
+ | |||
====Biostabilization by animals==== | ====Biostabilization by animals==== | ||
− | [[Image:zandkokerworm.jpg|thumb| | + | [[Image:zandkokerworm.jpg|thumb|250px|Fig. 4 Example of biostabilization by animals.]] |
Some macrozoobenthos can actively filter sediment particles from the water column and deposit them on the bed. The presence of a '''mussel bank''', for example, will alter the bed in different ways. Mussels at high densities will protect the underlying sediment from [[erosion]] by waves and currents (armouring effect). In addition, mussels are '''[[filter feeding|filter feeders]]''' and actively remove small suspended particles from the water column and any inorganic material (e.g. silt) is rejected as faeces and pseudofaeces. Some of this material will get deposited and incorporated into the bed, causing a shift in the composition to finer sediments and an increase in bed-level. | Some macrozoobenthos can actively filter sediment particles from the water column and deposit them on the bed. The presence of a '''mussel bank''', for example, will alter the bed in different ways. Mussels at high densities will protect the underlying sediment from [[erosion]] by waves and currents (armouring effect). In addition, mussels are '''[[filter feeding|filter feeders]]''' and actively remove small suspended particles from the water column and any inorganic material (e.g. silt) is rejected as faeces and pseudofaeces. Some of this material will get deposited and incorporated into the bed, causing a shift in the composition to finer sediments and an increase in bed-level. | ||
Line 39: | Line 45: | ||
====Biodestabilization==== | ====Biodestabilization==== | ||
− | [[Image:destabilisation.jpg|thumb| | + | |
− | [[Benthic]] fauna may destabilize the substrate by their burrowing and surface deposit feeding activity (e.g. bivalves, snails and crustaceans; Fig. 5) | + | [[Image:destabilisation.jpg|thumb|250px|Fig. 5 Example of bioturbation.]] |
+ | |||
+ | [[Benthic]] fauna may destabilize the substrate by their burrowing and surface deposit feeding activity (e.g. bivalves, snails and crustaceans; Fig. 5). The constant mixing and recycling of sediment in the top centimeters of the bed, known as [[bioturbation]], results in a change in the vertical particle size profile. Selective uptake of preferred particle sizes and their subsequent defaecation results in sorting and pelletizing of sediments. Together, the burrowing and the constant movement within the substrate, results in the generation of a surface micro-relief that has a higher hydraulic roughness, which increases turbulence and increases the potential for erosion. Bioturbators also interact with biostabilizers, by destabilizing the sediment as a result of grazing on biostabilizers such as microalgae (Montserrat, F., et al., 2008<ref>Montserrat, F., Van Colen, C., Degraer, S., Ysebaert, T. and Herman, P.M.J. 2008. Benthic community-mediated sediment dynamics. Mar. Ecol. Prog. Ser. 372: 43–59</ref>). On the other hand, bioturbators may promote the microphytobenthos growth by organically enriching the sediment via biodeposition. Furthermore, [[bioturbation]] affects the sediment water content, porosity and sediment cohesion<ref>Cozzoli, F., Gjoni, V., Del Pasqua, M., Hu, Z., Ysebaert, T., Herman, P.M.J. and Bouma, T.J. 2019. A process based model of cohesive sediment resuspension under bioturbators' influence. Science of The Total Environment 670: 18-30</ref>. | ||
+ | |||
+ | Mesocosm experiments by Cozzoli et al. (2020<ref name=C20>Cozzoli, F., Gomes da Conceicao, T., Van Dalen, J., Fang, X., Gjoni, V., Herman, P.M.J., Hu, Z., Soissons, L.M., Walles, B., Ysebaert, T. and Bouma, T.J. 2020. Biological and physical drivers of bio-mediated sediment resuspension: A flume study on Cerastoderma edule. Estuarine, Coastal and Shelf Science 241, 106824</ref>) show that the effect of bioturbation by bivalves mainly occurs in muddy sediments and is strongest at moderate flow rates, which are insufficient to erode a cohesive sediment bed, but strong enough to suspend sediment particles when the cohesive bonds have been broken by bioturbation. These experiments also show that the degree of bioturbation is mainly related to the metabolic activity of the individual bioturbators. Metabolism is related to body mass, but increasing body mass does not increase metabolism in the same proportion<ref>Vladimirova, I., Kleimenov, S. and Radzinskaya, L. 2003. The relation of energy metabolism and body weight in bivalves (Mollusca: Bivalvia). Biol. Bull. 30: 392–399</ref>. A large number of small bioturbators thus produce more bioturbation than a smaller number of larger bioturbators with the same total mass. In order to estimate correctly the effect of bioturbation on the sediment balance, models must therefore be able to simulate the spatial distribution of the size classes of benthic animals<ref name=C20/>. Because the density of bioturbators is usually greatest in the intermediate-high part of the mudflat, their activity counteracts further upward growth of the mudflat<ref>Wood, R. and Widdows, J. 2002. A model of sediment transport over an intertidal transect, comparing the influences of biological and physical factors. Limnol. Oceanogr. 47: 848–855</ref>. | ||
+ | |||
+ | Research of Paarlberg et al. (2005<ref name="Paarlberg et al. 2005"> Paarlberg, A. J., Knaapen, M. A. F., de Vries, M. B., Hulscher S. J. M. H. and Wang, Z. B. 2005. Modelling of the biological influence on the morphology and bed composition of an intertidal flat. Estuarine Coastal and Shelf Science 64 (4): 577-590</ref>) has shown that impacts of (de)stabilizing biota on mudflat morphology and bed composition can be significant and can be quantified by adding a limited number of algorithms to existing hydro-morphological models. Borsje et al. (2008<ref name="Borsje et al. 2007"> Borsje, B.W., de Vries, M.B., Hulscher S.J.M.H. and de Boer, G.J. 2008. Modeling large scale cohesive sediment transport affected by biological activity. Estuarine, Coastal and Shelf Science 78: 468-480</ref>) show that the influence of (de)stabilizers might extend beyond the mudflat scale to the estuary scale in cases of meso-tidal highly productive systems, such as the Wadden Sea. | ||
==Zoning== | ==Zoning== | ||
Examples of biota acting as [[ecosystem]] engineers in the intertidal (Fig. 6). Key biota are divided into two functional groups, the bio-stabilisers and bio-destabilisers, with varying spatial distribution along estuarine gradients (both axial and vertical). | Examples of biota acting as [[ecosystem]] engineers in the intertidal (Fig. 6). Key biota are divided into two functional groups, the bio-stabilisers and bio-destabilisers, with varying spatial distribution along estuarine gradients (both axial and vertical). | ||
− | [[Image:zoninggeobiointeraction.jpg|thumb|center|350px| Fig.6 Illustrates how biota act as ecosystem engineers and influence sediment stability and morphology in the intertidal zone. | + | |
− | ]] | + | [[Image:zoninggeobiointeraction.jpg|thumb|center|350px| Fig.6 Illustrates how biota act as ecosystem engineers and influence sediment stability and morphology in the intertidal zone.]] |
− | == | + | ==Related articles== |
:[[Coastal and marine sediments]] | :[[Coastal and marine sediments]] | ||
:[[Spatial and temporal scales in biogeomorphology]] | :[[Spatial and temporal scales in biogeomorphology]] | ||
:[[Salt marshes]] | :[[Salt marshes]] | ||
− | :[[ | + | :[[Spatial and temporal variability of salt marshes]] |
− | :[[ | + | :[[Nature-based shore protection]] |
+ | :[[Biogenic reefs of Europe and temporal variability]] | ||
+ | :[[Dynamics, threats and management of biogenic reefs]] | ||
+ | :[[Dynamics, threats and management of salt marshes]] | ||
+ | :[[Seagrass meadows]] | ||
+ | |||
==References== | ==References== | ||
+ | <references/> | ||
+ | |||
− | |||
{{author | {{author | ||
Line 65: | Line 83: | ||
|AuthorFullName=Widdows, John | |AuthorFullName=Widdows, John | ||
|AuthorName=John}} | |AuthorName=John}} | ||
+ | |||
+ | |||
+ | |||
+ | {{Review | ||
+ | |name=Job Dronkers|AuthorID=120| | ||
+ | }} | ||
[[Category:Physical coastal and marine processes]] | [[Category:Physical coastal and marine processes]] |
Latest revision as of 17:43, 7 March 2023
This article considers the biogeomorphology of coastal aquatic systems. The biogeomorpholgy of both hard and soft substratum including the role in which plants and animals play in stabilizing and de-stabilizing these aquatic systems is also explored.
Contents
Introduction
Biogeomorphology considers the interactions between the ecology and geomorphology of a system. Ecology is the study of relationships between the biota and their environment, and geomorphology examines landforms and how they are formed. Biogeomorphology can be studied in terrestrial as well as aquatic systems. Within aquatic systems biogeomorphological relationships can be found for both hard substrates (rocky shores / coral reefs) and soft substrates (muddy / sandy coastal sediments). Biota can alter geomorphology by creating hard substrates (e.g. coral reefs) or by modifying the stability or erodability of soft substrates. Key species in the benthic communities of sediment shores can influence geomorphology by acting as biostabilizers or biodestabilizers of sediment. The impact of organisms on coastal morphology can be both dramatic (e.g. coral reefs, saltmarshes, mussel beds) and more subtle by modifying rates of sediment erosion and accretion. Biota are not only influenced by various environmental factors (abiotic – physical & chemical; biotic – other organisms; anthropogenic – humans), but organisms also act as ecosystem engineers and modify their environment (physical, chemical and biological aspects). Ecosystem engineers create valuable habitats (e.g. coral reefs and saltmarshes) that are important for fish and birds and serve as a vital part of our natural coastal defence against storm surges and sea level rise.
Essential concepts
The term biogeomorphology was first used in the eighties (Viles, 1988[1]), although earlier studies focused on the topic without using this term. In coastal systems biogeomorphological interactions are clearly demonstrated in shallow, productive waters and various sedimentary environments. Examples of biogeomorphological interrelationships include sand dune development, tidal flats, salt marshes, mangrove systems and coral reefs.
Relevant geomorphological factors in coastal systems are bathymetry, bed composition (rock, gravel, sand, silt), and the transport of sediment. It also includes factors that drive morphological processes, such as water flow and wave energy. The biota involved in coastal biogeomorphology[2] include plants and animals, ranging from very small (microorganisms) to very large (feeding pits of whales).
The geomorphological directly affects biota through its influence on habitats. Coastal morphology and geomorphological processes define the gradients between high and low, between wet and dry and between sedimentation and erosion. These gradients and the processes that cause them determine the gradients in grain size, nutrient levels, organic matter levels and water content. Plants and animals are adapted to specific conditions and will therefore be found and abundant at specific locations (often forming habitats).
The biological influence on geomorphological processes is through the ability of biota to create, maintain or transform their geomorphological surroundings. This is demonstrated by the influence of vegetation and macrofauna on water flow, sediment erosion and deposition, or by the influence of fauna on sediment characteristcs through bioturbation and biostabilization.
In some cases morphological processes are dominant over biological processes and therefore it is necessary for biota to adjust to their environment. In other cases biological processes are dominant (e.g. coral reefs, salt marshes). The most interesting are those cases where there is a mutual interaction that leads to feedback coupling of processes. When looking for these cases, it is important to examine the spatial and temporal scales of the mutually interacting processes.
Biogeomorphology for hard substrates
On rocky shores and coral reefs the typical community of organisms modifies the erosion of substrate. Influenced by abiotic factors such as wave energy, splash water, inundation frequency and -period, depth, desiccation and substrate type, a clear zonation of various cyanobacteria, (macro-)algae, fungi, lichens, molluscs, sponges, worms, sea urchins, fish, etc. can be found. Some of these organisms dwell on the surface of the substrate, while others live within the substrate. Their effect on erosion of the substrate is divided into ‘biological corrosion’ processes that modify the substrate but produce no erosion product, and ‘biological abrasion’ processes that generate an erosion product. Grazing, burrowing and boring on or in the substrate involves biological abrasion, and is most apparent in coral reef systems.
Biogeomorphology for soft substrates
In soft coastal systems, the interrelationships between geomorphological factors and biota mainly apply to benthic fauna and flora. The presence of benthic species is affected by hydraulic and morphologic conditions, such as water depth or elevation on the shore, current velocity, wave action, salinity and grain size. The biota responsible for changes in geomorphology of soft substrates can be divided into two functional groups, namely biostabilizers and biodestabilizers. Biostabilization leads to increased sediment stability and a reduction in erosion potential, whereas biodestabilization leads to reduced sediment stability and an increase in erodibility.
Biostabilization by plants
On tidal flats, small algae (diatoms) are capable of affecting the geomorphology. These diatoms can form extensive algal mats and excrete extracellular polymeric substances, which is a sticky mucus-like substance made of polysaccharides that glues the sediment together and therefore protects the sediment against erosion.
Seagrass is dependent on clear water, it needs sunlight to grow. A seagrass meadow (Fig. 2) slows down the current velocity near the bed, therefore reducing the resuspension of sand and silt, and this in turn helps to maintain clear water. Their root system also promotes binding of the substrate. In addition, seagrass meadows encourage deposition of suspended sediment, which leads to the supply of organic material and nutrients needed for growth. Seaweeds and salt marsh plants are capable of modifying their physical environments by damping down wave energy and tidal currents. Salt marsh vegetation can also promote sediment deposition resulting in a gradual elevation of the marsh on the upper shore. The higher the marsh gets, the more vegetation can grow and the better the protection against erosion. Other stabilizing effects result from cementation of beach-rock by cyanobacteria and stromatolite formation by algae. Research of Temmerman et al. (2005[3], 2007[4]) points out that the interaction of vegetation growth, tides and sedimentation is crucial in the formation of the typical levee-basin configuration of the saltmarsh landscape.
Biostabilization by animals
Some macrozoobenthos can actively filter sediment particles from the water column and deposit them on the bed. The presence of a mussel bank, for example, will alter the bed in different ways. Mussels at high densities will protect the underlying sediment from erosion by waves and currents (armouring effect). In addition, mussels are filter feeders and actively remove small suspended particles from the water column and any inorganic material (e.g. silt) is rejected as faeces and pseudofaeces. Some of this material will get deposited and incorporated into the bed, causing a shift in the composition to finer sediments and an increase in bed-level. Animal tube fields at high densities can also stabilize the sediment, because there is an accumulation of fine particles and organic matter between the tubes (Fig. 4). The tubes may also reduce near-bed flow and create skimming flow above thus creating a stabilizing effect. Mucus production by the community of microorganisms, meiofauna and macrofauna between the tubes may also contribute to sediment stability.
Biodestabilization
Benthic fauna may destabilize the substrate by their burrowing and surface deposit feeding activity (e.g. bivalves, snails and crustaceans; Fig. 5). The constant mixing and recycling of sediment in the top centimeters of the bed, known as bioturbation, results in a change in the vertical particle size profile. Selective uptake of preferred particle sizes and their subsequent defaecation results in sorting and pelletizing of sediments. Together, the burrowing and the constant movement within the substrate, results in the generation of a surface micro-relief that has a higher hydraulic roughness, which increases turbulence and increases the potential for erosion. Bioturbators also interact with biostabilizers, by destabilizing the sediment as a result of grazing on biostabilizers such as microalgae (Montserrat, F., et al., 2008[5]). On the other hand, bioturbators may promote the microphytobenthos growth by organically enriching the sediment via biodeposition. Furthermore, bioturbation affects the sediment water content, porosity and sediment cohesion[6].
Mesocosm experiments by Cozzoli et al. (2020[7]) show that the effect of bioturbation by bivalves mainly occurs in muddy sediments and is strongest at moderate flow rates, which are insufficient to erode a cohesive sediment bed, but strong enough to suspend sediment particles when the cohesive bonds have been broken by bioturbation. These experiments also show that the degree of bioturbation is mainly related to the metabolic activity of the individual bioturbators. Metabolism is related to body mass, but increasing body mass does not increase metabolism in the same proportion[8]. A large number of small bioturbators thus produce more bioturbation than a smaller number of larger bioturbators with the same total mass. In order to estimate correctly the effect of bioturbation on the sediment balance, models must therefore be able to simulate the spatial distribution of the size classes of benthic animals[7]. Because the density of bioturbators is usually greatest in the intermediate-high part of the mudflat, their activity counteracts further upward growth of the mudflat[9].
Research of Paarlberg et al. (2005[10]) has shown that impacts of (de)stabilizing biota on mudflat morphology and bed composition can be significant and can be quantified by adding a limited number of algorithms to existing hydro-morphological models. Borsje et al. (2008[11]) show that the influence of (de)stabilizers might extend beyond the mudflat scale to the estuary scale in cases of meso-tidal highly productive systems, such as the Wadden Sea.
Zoning
Examples of biota acting as ecosystem engineers in the intertidal (Fig. 6). Key biota are divided into two functional groups, the bio-stabilisers and bio-destabilisers, with varying spatial distribution along estuarine gradients (both axial and vertical).
Related articles
- Coastal and marine sediments
- Spatial and temporal scales in biogeomorphology
- Salt marshes
- Spatial and temporal variability of salt marshes
- Nature-based shore protection
- Biogenic reefs of Europe and temporal variability
- Dynamics, threats and management of biogenic reefs
- Dynamics, threats and management of salt marshes
- Seagrass meadows
References
- ↑ Viles H.A. (ed.) 1988. Biogeomorphology. Oxford: Basil Blackwell Ltd.
- ↑ Baptist M.J. 2005. Biogeomorphology. In: Schwartz, M. (Ed.). Encyclopaedia of Coastal Science, pp. 192-193. ISBN 1-4020-1903-3
- ↑ Temmerman, S., Bouma, T. J., Govers, G., Wang, Z. B., De Vries, M. B. and Herman P. M. J. 2005. Impact of vegetation on flow routing and sedimentation patterns: Three-dimensional modeling for a tidal marsh. J. Geophys. Res. 110, F04019.
- ↑ Temmerman, S., Bouma, T.J., Van de Koppel, J., Van der Wal, D., De Vries, M.B. and Herman, P.M.J. 2007. Vegetation causes channel erosion in a tidal landscape. Geology 7: 631-634
- ↑ Montserrat, F., Van Colen, C., Degraer, S., Ysebaert, T. and Herman, P.M.J. 2008. Benthic community-mediated sediment dynamics. Mar. Ecol. Prog. Ser. 372: 43–59
- ↑ Cozzoli, F., Gjoni, V., Del Pasqua, M., Hu, Z., Ysebaert, T., Herman, P.M.J. and Bouma, T.J. 2019. A process based model of cohesive sediment resuspension under bioturbators' influence. Science of The Total Environment 670: 18-30
- ↑ 7.0 7.1 Cozzoli, F., Gomes da Conceicao, T., Van Dalen, J., Fang, X., Gjoni, V., Herman, P.M.J., Hu, Z., Soissons, L.M., Walles, B., Ysebaert, T. and Bouma, T.J. 2020. Biological and physical drivers of bio-mediated sediment resuspension: A flume study on Cerastoderma edule. Estuarine, Coastal and Shelf Science 241, 106824
- ↑ Vladimirova, I., Kleimenov, S. and Radzinskaya, L. 2003. The relation of energy metabolism and body weight in bivalves (Mollusca: Bivalvia). Biol. Bull. 30: 392–399
- ↑ Wood, R. and Widdows, J. 2002. A model of sediment transport over an intertidal transect, comparing the influences of biological and physical factors. Limnol. Oceanogr. 47: 848–855
- ↑ Paarlberg, A. J., Knaapen, M. A. F., de Vries, M. B., Hulscher S. J. M. H. and Wang, Z. B. 2005. Modelling of the biological influence on the morphology and bed composition of an intertidal flat. Estuarine Coastal and Shelf Science 64 (4): 577-590
- ↑ Borsje, B.W., de Vries, M.B., Hulscher S.J.M.H. and de Boer, G.J. 2008. Modeling large scale cohesive sediment transport affected by biological activity. Estuarine, Coastal and Shelf Science 78: 468-480
Please note that others may also have edited the contents of this article.
|